以丙烯腈-丁二烯-苯乙烯共聚物(ABS)及玻璃纤维(GF)为原料,以苯乙烯-马来酸酐共聚物(SMA)和环氧树脂(Epoxy resin)作为界面相容剂,研究了界面相容荆对玻璃纤维增强ABS复合材料力学性能及界面粘接的影响.结果表明,加入SMA或环氧树脂,玻纤增强ABS复合材料的力学性能明显提高;SMA与环氧树脂复配有明显的协同效果,同时加入SMA和环氧树脂后的复合材料的性能更加优越,界面粘接性能得到很大的改善,在玻纤加入量为30%时,其拉伸强度、弯曲强度、冲击强度较未添加界面相容剂时分别提高了44%、29%、100%.
参考文献
| [1] | Mariana Etcheverry;Maria L. Ferreira;Numa J. Capiati .Strengthening of polypropylene-glass fiber interface by direct metallocenic polymerization of propylene onto the fibers[J].Composites, Part A. Applied science and manufacturing,2008(12):1915-1923. |
| [2] | Li LP;Li B;Tang F .Influence of maleic anhydride-grafted EPDM and flame retardant on interfacial interaction of glass fiber reinforced PA-66[J].European Polymer Journal,2007(6):2604-2611. |
| [3] | Nishar Hameed;P.A. Sreekumar;Bejoy Francis .Morphology, dynamic mechanical and thermal studies on poly(styrene-co-acrylonitrile) modified epoxy resin/glass fibre composites[J].Composites, Part A. Applied science and manufacturing,2007(12):2422-2432. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%