The microstructures of austenitic stainless steel strip were studied using color metallographic method and electron probe micro analysis （EPMA）. In the cast strips, there are three kinds of solidification structures： fine cel- lular dendrite in the surface layer, equiaxed grains in the center and fine dendrite between them. The solidification mode in the surface layer is the primary austenite AF mode because of extremely high cooling rate, with the retained ferrite located around the primary cellular austenite. In the fine dendrite zone, the solidification mode of molten stainless steel changes to FA mode and the residual ferrite with fish-bone morphology is located at the core of the dendrite. The retained ferrite of equiaxed grains in the center is located in the center of broken primary ferrite dendrite with vermicular morphology.
参考文献
| [1] | 张晓明,苗雨川,刘相华,王国栋.薄带铸轧过程中微观偏析的模拟[J].东北大学学报(自然科学版),2001(02):162-164. |
| [2] | DONG-KYUN CHOO;SUNGHAK LEE;HEE-KYUNG MOON .Analysis and Prevention of Cracking during Strip Casting of AISI 304 Stainless Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2001(9):2249-2258. |
| [3] | Hirata K;Umezawa O;Nagai K .Microstructure of Cast Strip in 0.lmass% C Steel Containing Phosphorus[J].Materials Transactions,2002,43(02):305. |
| [4] | Nikolai ZAPUSKALOV .Comparison of Continuous Strip Casting with Conventional Technology[J].ISIJ International,2003(8):1115-1127. |
| [5] | Birat J P;Steffen R.Current Rb-D Work on Near-Net-Shape Continuous Casting Technologies in Europe[J].MPT Inte,1991(03):44. |
| [6] | Shin Y K;Kang T;Renolds T et al.Wright Development of Twin Roll Strip Caster for Sheet Steels[J].Ironmaking and Steelmaking,1995,22(01):35. |
| [7] | MANJIN HA;JUTAE CHOI;SEONGIN JEONG .Analysis and Prevention of Microcracking Phenomenon Occurring during Strip Casting of an AISI 304 Stainless Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2002(5):1487-1497. |
| [8] | Yamauchi T;Nakanori T;Hasegawa M et al.Characteristics of Stainless Steel Strip Cast by Twin Rolls[J].Transactions of the Iron and Steel Institute of Japan,1988,28(01):23. |
| [9] | Toshiaki MIZOGUCHI;Ken-ichi MIYAZAWA .Formation of Solidification Structure in Twin Roll Casting Process of 18 Cr-8Ni Stainless Steel[J].ISIJ International,1995(6):771-777. |
| [10] | Mizukami H;Suzuki T;Umeda T et al.Initial Stage of Rapid Solidification of 18-8 Stainless Steel[J].Materials Science and Engineering,1993,173A(1-2):361. |
| [11] | Mizukami H;Suzuki T;Umeda T .Initial Stage of Rapid Solidification of 18-8 Stainless Steel[J].Tetsu To Hagane-Journal of the Iron & Steel Institute of Japan,1991,77(10):1672. |
| [12] | Seheubert T;Loser W;Schinnerling S et al.Alternative Phase Formation in Thin Strip Casting of Stainless Steels[J].Materials Science and Technology,1995,11(02):181. |
| [13] | Baldissin D;Baricco M;Battezzati L .Microstructures in Rapidly Solidified AISI 304 Interpreted According to Phase Selec tionTheory[J].Materials Science and Engineering,2006,449-451(03):1200. |
| [14] | Rajasekhar K;Harendranath C S;Raman R et al.Microstructure Evolution During Solidification of Austenitic Stainless Steel Weld Metals.. A Color Metallographic and Elecutron Microprobe Analysis Study[J].Materials Characterization,1997,38(02):53. |
| [15] | TOSHIHIKO KOSEKI .Solidification of Undercooled Fe-Cr-Ni Alloys: Part 111. Phase Selection in Chill Casting[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1997(11):2385-2396. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%