SiC陶瓷由于具有高温强度高、抗氧化性能好、热导率高、化学稳定性好等优异的综合性能,已成为极有吸引力的磨损和高温结构材料,但较低的室温强度和断裂韧性以及对缺陷的高度敏感性限制了其应用范围.在SiC基体中添加过渡金属硼化物或碳化物是解决这些问题的有效方法之一.本文综述了国内外在TiB2增强SiC基复合材料方面的研究进展,并展望了该体系复合材料今后研究的重点方向.
参考文献
| [1] | Kezhi Li,Jian Wei,Hejun Li,Chuang Wang,Gengsheng Jiao.Silicon assistant carbothermal reduction for SiC powders[J].北京科技大学学报（英文版）,2008(04):484-488. |
| [2] | X. Xu;S. Mei;J.M.F. Ferreira .Silicon carbide ceramics through temperature-induced gelation and pressureless sintering[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):335-340. |
| [3] | 蒋进明,王松,李伟.先驱体浸渍裂解结合反应熔渗法制备Cf/ZrC-SiC复合材料[J].人工晶体学报,2013(04):692-694. |
| [4] | 李庆余,赖延清,李劼.应用新一代常温固化TiB2阴极涂层技术提高我国预焙铝电解槽寿命[J].轻金属,2004(10):34-37. |
| [5] | G. J. Zhang;X. M. Yue;Z. Z. Jin;J. Y. Dai .In-situ Synthesized TiB_2 Toughened SiC[J].Journal of the European Ceramic Society,1996(4):409-412. |
| [6] | Zhang GJ.;Yue XM.;Jin ZZ. .EFFECTS OF NI ADDITION ON MECHANICAL PROPERTIES OF TIB2/SIC COMPOSITES PREPARED BY REACTIVE HOT PRESSING (RHP)[J].Journal of Materials Science,1997(8):2093-2097. |
| [7] | Cho KS.;Lee JG.;Kim YW.;Choi HJ. .In situ enhancement of toughness of SiC-TiB2 composites[J].Journal of Materials Science,1998(1):211-214. |
| [8] | S. S. Ordan'yan;S. V. Vikhman;E. V. Prilutskii .INVESTIGATION OF THE STRUCTURE AND PROPERTIES OF MATERIALS IN THE SiC - TiB_2 SYSTEM[J].Powder Metallurgy and Metal Ceramics,2002(1/2):42-46. |
| [9] | 周松青,肖汉宁,李贵毓.原位合成碳化硅-硼化钛复相陶瓷的高温摩擦性能及其磨损机理[J].硅酸盐学报,2006(02):152-157. |
| [10] | C.Blanc and D.Goeuriot .Microstructural and mechanical characterization of SiC-submicron TiB2 composites[J].Journal of the European Ceramic Society,1999(5):561-569. |
| [11] | C.Blanc and D.Treheux .Wear resistance of ?SiC-TiB2 Composites prepared by reactive sintering[J].Journal of the European Ceramic Society,1999(5):571-579. |
| [12] | Dusan Bucevac;Snezana Boskovic;Branko Matovic;Vladimir Krstic .Toughening of SiC matrix with in-situ created TiB_2 particles[J].CERAMICS INTERNATIONAL,2010(7):2181-2188. |
| [13] | Dusan Bucevac;Branko Matovic;Snezana Boskovic .Pressureless sintering of internally synthesized SiC-TiB_2 composites with improved fracture strength[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2011(3):990-996. |
| [14] | Bucevac, D.;Matovic, B.;Babic, B.;Krstic, V. .Effect of post-sintering heat treatment on mechanical properties and microstructure of SiC-TiB_2 composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(4/5):2034-2041. |
| [15] | 陈宇红,杨和平,贾雪荭,陈百义.碳化硅-二硼化钛复合材料烧结工艺研究[J].陶瓷学报,2010(01):29-31. |
| [16] | 王伟,连景宝,茹红强.TiB2/SiC陶瓷复合材料制备工艺的研究[J].材料与冶金学报,2011(01):23-29. |
| [17] | 王伟,连景宝,岳新艳,茹红强.原位合成TiB2颗粒增韧SiC的显微组织与断裂韧性[J].东北大学学报：自然科学版,2011(11):1578-1582. |
| [18] | Tani Toshihiko .Processing,microstructure and properties of in-situ reinforced SiC matrix composites[J].Composites, Part A. Applied science and manufacturing,1999(4):419-423. |
| [19] | 冉松林,汪德文,Huang Shui-gen,Vander BiestOmer,Vleugels Jef.以MH2（M=Ti,Zr）为原料反应烧结制备MB2-SiC复相陶瓷[J].人工晶体学报,2013(04):732-736. |
| [20] | 胡继林,肖汉宁,李青,郭文明,高朋召,施浩良.碳热还原法合成TiB2-SiC复合粉末及其机理分析[J].湖南大学学报（自然科学版）,2012(02):66-70. |
| [21] | 胡继林,刘鑫,郭文明,施浩良,徐秀华.TiB2-SiC复合粉末的碳热还原法合成及其表征[J].硅酸盐通报,2011(04):794-799. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%