在变形温度800 ～1100℃,变形速率0.01 ～5 s-1范围内,利用Gleeble-1500D热模拟试验机,采用等温压缩实验研究了Fe-25Mn-3Al高锰奥氏体TWIP钢的热变形行为.结果表明,Fe-25Mn-3Al钢流变应力曲线出现一个明显的流变应力峰值,峰值之后流变应力逐渐降低,主要为稳态流变特征.双曲正弦形式的Arrhenius模型可以较好地描述Fe-25Jn-3 Al钢热变形流变应力,钢的热变形激活能Q为365.2 kJ/mol.动态再结晶机制为Fe-25Mn-3Al钢热变形过程中最主要的动态软化机制.
参考文献
| [1] | Chung, K.;Ahn, K.;Yoo, D.-H.;Chung, K.-H.;Seo, M.-H.;Park, S.-H. .Formability of TWIP (twinning induced plasticity) automotive sheets[J].International Journal of Plasticity,2011(1):52-81. |
| [2] | Bouaziz, O.;Allain, S.;Scott, C.P.;Cugy, P.;Barbier, D. .High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships[J].Current opinion in solid state & materials science,2011(4):141-168. |
| [3] | Barbier, D;Gey, N;Allain, S;Bozzolo, N;Humbert, M .Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2009(1/2):196-206. |
| [4] | Grassel O.;Frommeyer G.;Meyer LW.;Kruger L. .High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development - properties - application[J].International Journal of Plasticity,2000(10/11):1391-1409. |
| [5] | Li D J;Feng Y R;Yin Z F et al.Prediction of hot deformation behavior of Fe-25Mn-3Si-3Al TWIP steel[J].Rare Metal Materials and Engineering,2011,528(28):8084-8089. |
| [6] | Dejun Li;Yaorong Feng;Zhifu Yin;Fengshou Shangguan;Ke Wang;Qiang Liu;Feng Hu .Hot deformation behavior of an austenitic Fe-20Mn-3Si-3Al transformation induced plasticity steel*[J].Materials & design,2012(Feb.):713-718. |
| [7] | Marandi A;Zarei-Hanzaki A;Haghdadi N et al.The prediction of hot deformation behavior in Fe-21Mn-2.5Si-l.5Al transformation-twinning induced plasticity steel[J].Rare Metal Materials and Engineering,2012,554(30):72-78. |
| [8] | 刘晓艳,潘清林,何运斌,李文斌,梁文杰,尹志民.Al-Cu-Mg-Ag合金热压缩变形的流变应力行为和显微组织[J].中国有色金属学报,2009(02):201-207. |
| [9] | 李文斌,潘清林,梁文杰,何运斌,刘俊生,李运春.含Sc超高强Al-Zn-Cu-Mg-Sc-Zr合金的热压缩变形流变应力[J].中国有色金属学报,2008(05):777-782. |
| [10] | McQueen H J;Yue S;Ryan N D et al.Hot working characteristics of steels in austenitic state[J].Journal of Materials Processing Technology,1995,53(1-2):293-310. |
| [11] | Kassner ME.;Perez-Prado MT. .Five-power-law creep in single phase metals and alloys (vol 45, pg 1, 2000)[J].Progress in materials science,2000(3):273-0. |
| [12] | Ehab A. El-Danaf;Abdulhakim A. Almajid;Mahmoud S. Soliman .High-Temperature Deformation and Ductility of a Modified 5083 Al Alloy[J].Journal of Materials Engineering and Performance,2008(4):572-579. |
| [13] | 张俊善.材料的高温变形与断裂[M].北京:科学出版社,2007 |
| [14] | Dehghan-Manshadi A;Barnett MR;Hodgson PD .Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):664-672. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%