本文采用了CFD方法,对中国空气动力研究与发展中心的STORK 5.0 WPX全尺寸风电机叶轮气动件能进行了数值模拟,对转轮的几个截面压力系数进行了预测,并与风洞实验结果进行了对比,两者基本上吻合,并通过对流场进行分析,验证了计算方法的可行性和准确性.
参考文献
| [1] | 贺德馨.风工程与工业空气动力学[M].北京:国防工业出版社,2006 |
| [2] | Schepers J G .Verification of European Wind Turbine Design Codes[Z].,2001. |
| [3] | Hand M M .Unsteady Aerodynamics Experiment Phase Ⅵ:Wind Tunnel Test Configurations and Avariable Data Campaigna[NREL/TP-500-29955][R].,2001. |
| [4] | Ronsten G .Geometry and Installation in Wind Tunnel of a STORK 5.0 WPX Wind Turbine Blade Equipped with Pressure Taps[Technical Report FFA-P-A1003][R].,1994. |
| [5] | Menter F R .Performance of Popular Turbulence Models for Aerodynamic flows[AIAA Paper 93-2906][R].,1993. |
| [6] | Sarun Benjanirat.Evaluation of Turbulence Models for the Prediciton of Wind Turbine Aerodynamic[A].Reno,Nevada,CA,2003 |
| [7] | J. Johansen;N. N. Sorensen;J. A. Miehelsen;S. Schreck .Detached-Eddy Simulation of Flow Around the NREL Phase Ⅵ Blade[J].Wind energy,2002(2/3):185-197. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%