研究了铁素体区热轧高温卷取条件下,2种不同成分的IF钢的织构特征.结果表明,高温卷取后,普通Ti-IF钢发生了完全再结晶,中心面和1/4面上形成了很强的《111》//ND再结晶织构;高强Ti-IF钢大部分晶粒仍处于轧制状态,只有极少部分晶粒发生了再结晶,中心面和1/4面上形成的织构组分以《110》//RD为主,《111》//ND再结晶织构较弱.织构分析表明,2种钢的表面织构均较弱,普通Ti-IF钢表面上《001》//ND组分占优,高强Ti-IF钢表面上《110》//ND组分强度最高.
参考文献
| [1] | Matsuoka Saiji;Sakata Kei;Furukimi Osamu.Development of Super Deep Drawable Sheet by Lubricant Hot Rolling in Ferrite Region[A].Aachen:Fotodruck Mainz Gmbh,1998:85-96. |
| [2] | McManus;George J .Ferritic Rolling of Hot Rolled Sheet:Successful Use of New Technology Could Open Doors[J].Iron & Steel Engineers,1995,72(08):53-54. |
| [3] | Leory V;Paepe A De;Herman J C.Ferritic Hot Rolling of Thin Gauge Hot Strips:Processing and Properties[A].Aachen:Fotodruck Mainz Gmbh,1998:51-60. |
| [4] | V.J. Martinez;J.I. Verdeja;J.A. Pero-Sanz .Interstitial free steel Influence of #alpha#-phase hot-rolling and cold-rolling reduction to obtain extra-deep drawing quality[J].Materials Characterization,2001(1):45-53. |
| [5] | Andreas Tomitz;Radko Kaspar .Ferritic rolling with additional annealing to produce a deep-drawable ultra-thin-gauge hot strip[J].Steel Research,2000(12):497-503. |
| [6] | Tomitz A.;Kaspar R. .Deep-drawable Thin-gauge Hot Strip of Steel as a Substitution for Cold Strip[J].ISIJ International,2000(9):927-931. |
| [7] | 梁志德;徐家桢;王福.织构材料的三维取向分析术[M].沈阳:东北工学院出版社,1986 |
| [8] | Yoda Rika;Tsukatani Ichiro;Inoue Tsuyoshi et al.Effect of Chemical Composition on Recrystallization Behavior and r-Value in Ti-Added Ultra Low Carbon Sheet Steel[J].ISIJ International,1994,34(01):70-76. |
| [9] | Inagaki Hirosuke .Fundamental Aspect of Texture Formation in Low Carbon Steel[J].ISIJ International,1994,34(04):313-321. |
| [10] | Brun C;Patou P;Parniere P.Influence of Phosphorus and Manganese on the Recrystallization Texture Development During Continuous Annealing in Ti-IF Sheets[A].Warrendale,PA:Metallurgical Soc of AIME,1982:173-197. |
| [11] | 赵子苏,毛卫民,余永宁,王利.钛对高强IF钢第二相粒子析出规律和力学性能的影响[J].钢铁,2000(09):47-51. |
| [12] | Hutchinson B;Artymowicz D .Mechanisms and Mmodeling of Microstructure/Texture Evolution in Interstitial-Free Steel Sheets[J].ISIJ Internarional,2001,41(06):533-541. |
| [13] | S.Matsuoka .Effect of Lubrication Condition on Recrystalliztion Texture of Ultra-low C Sheet Steel Hot-rolled in Ferrite Region[J].ISIJ International,1998(6):633-639. |
| [14] | Barrett C J .Influence of Lubrication on Through Thickness Texture of Ferritically Hot Rolled Interstitial Free Steel[J].Ironmaking and Steelmaking,1999,26(05):393-397. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%