本文基于非正交曲线坐标及非正交速度分量下完全守恒型的N-S方程,采用整体H型网格,用数值方法研究叶轮机械中的泄漏流动.对于不同的间隙尺寸,对于环壁静止与旋转的不同壁面条件,揭示了泄漏流与通道二次涡相互作用的细节,揭示了泄漏涡的生成与发展过程.
参考文献
| [1] | Rains D A .Tip Clearance Flow in Axial Flow Compressor and Pumps California Institute of Technology[R].Hydrodynamics and Mechanical Engineering Laboratories Report,1954. |
| [2] | Lakshminarayana B;Horlock J .Secondary and Leakage Flow in Turbomachines[J].International Journal of Mechanical Sciences,1963,5:287-307. |
| [3] | Inoue M;Kuroumaru M;Furukawa M .Behavior of Tip Leakage Flow Behind an Axial Compressor Rotor[J].Journal of Engineering for Gas Turbines and Power,Transactions of the ASME,1986,108(01) |
| [4] | STORER J A;Cumpsty N A.Tip Leakage Flow in Axial Compressor[M].ASME 90-GT-127,1990 |
| [5] | Stauter R C .Measurement of the Three-Dimensional Tip Region Flow Field in an Axial Compressor[J].Journal of Turbomachinery,Transactions of the ASME,1993,115:468-476. |
| [6] | 马宏伟;蒋浩康;聂超群 .轴流风机转子通道内叶尖区三维流场[J].工程热物理学报,1998,19(01):45-48. |
| [7] | Dawes W N .A Numerical Analysis of the ThreeDimensional Viscous Flow in a Transonic Compressor Rotor and Comparison with Experiment[J].Journal of Turbomachinery,Transactions of the ASME,1987,109:83-90. |
| [8] | Basson A;Kunz R;Lakshminarayana B .Grid Generation for Three-Dimensional Turbomachinery Geometries Including Tip Clearance[J].ASME Journal of Engineering for Power,1993,9:59-65. |
| [9] | R. V. Chima .Calculation of tip clearance effects in a transonic compressor rotor[J].Journal of turbomachinery,1998(1):131-140. |
| [10] | Jia X;Wang Z;Cai R.Numerical Investigation of Different Tip Gap Shapes Effects on Aerodynamic Performance of an Axial-Flow Compressor Stator[M].ASME 2001-GT-337,2001 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%