欢迎登录材料期刊网

材料期刊网

高级检索

人工时效前的室温停留,会对7475铝合金的人工时效产生一定的影响.通过电导率的测量,说明自然时效时由于GP区的弥散析出,导致样品的电导率持续下降;长时间室温停留后再进行人工时效时,由于GP区的形成,夺取一部分空位,使溶质原子扩散的驱动力减小,析出反应的表观激活能变大,电导率始终低于淬火后直接进行人工时效的样品.通过JMAK方程处理了所得数据,计算出重要的时效动力学参数t_C和n,并说明了各自的影响因素.

The effect of delaying at room temperature after quenching on artificial aging of 7475Al alloy was studied by electrical conductivity measurements. During room temperature aging,the GP zones in the alloy precipitate dispersively,and its electrical conductivity decreases. Because of the decrease of vacancy concentration,the alloy after long-term delaying at room temperature presents a higher apparent activation energy for the precipitation. and the electrical conductivity of the alloy naturally aged is lower than that of in-quenched alloy. The data of experiments are fitted by JMAK equation,and the parameters of t_C and n in the equation is deduced and the factors influencing the values of t_C and n is discussed.

参考文献

[1] 宋仁国.高强度铝合金的研究现状及发展趋势[J].材料导报,2000(01):20-21,34.
[2] 刘继华,李荻,郭宝兰.7xxx系列Al合金应力腐蚀开裂的研究[J].腐蚀科学与防护技术,2001(04):218-222.
[3] Starink M J;Li X M .A model for the electrical conductivity of peak-aged and overaged Al-Zn-Mg-Cu alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2003,34:899-901.
[4] R. C. Dorward .Precipitate coarsening during overaging of Al-Zn-Mg-Cu alloy[J].Materials Science and Technology: MST: A publication of the Institute of Metals,1999(10):1133-1138.
[5] Guyot P;Cottignies L .Precipitation kinetics mechanical strength and electrical conductivity of Al-Zn-Mg-Cu alloys[J].Acta Materials,1996,44:4161-4168.
[6] Poole W J;Shercliff H R;Castillo T .Process model for two step age hardening of 7475 aluminium alloy[J].aterials Science and Technology,1997,13:897-902.
[7] Starink M J;Wang S C .A model for the yield strength of overaged Al-Zn-Mg-Cu alloya[J].Acta Materialia,2003,51:5131-5140.
[8] 田莳;李秀臣;刘正堂.金属物理性能[M].北京:航空工业出版社,1994
[9] 孙振岩;刘春明.合金中的扩散与相变[M].沈阳:东北大学出版社,2002
[10] Gjonnes J;Simensen J .n electron microscope inveatigation of the microstructure in an aluminium-zinc-magnesium alloy[J].Acta Metallurgica,1970,18:881-885.
[11] Thackery P A .The nature and morphology of precipitate in Al-Zn-Mg alloys[J].Journal of the Institute of Metals,1968,96:228-290.
[12] Park J K;Ardell A J .Microstructures of the commercial 7075 Al alloy in the T651 and T7 tempers[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1983,14:1957-1960.
[13] Lorimer G W;Nicholson R B .Further results on the nucleation of pricitates in the Al-Zn-Mg system[J].Acta Metallurgica,1996,14:1009-1013.
[14] Johnson W A;Mehl R F .Reaction kinetics in processes of nucleation and growth[J].Transactions AIME,1939,135:416-418.
[15] Cumbrera F L;Scanchez F .The use of the JMAK kinetic equation for the analysis of solid-state reactions:Critical considerations and recent interpretations[J].Thermochimica Acta,1995,266:315-318.
[16] Sessa V.;Tomellini M.;Fanfoni M. .VALIDITY OF AVRAMIS KINETICS FOR RANDOM AND NONRANDOM DISTRIBUTIONS OF GERMS[J].Physical Review.B.Condensed Matter,1996(2):836-841.
[17] Embury J D;Nicholson R B .The nucleation of precipites:the sy8tem Al-Zn-MS[J].Acta Metallurgica,1965,13:403-408.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%