通过光纤光栅的方法实验研究了在热压罐成型工艺过程中,复合材料构件由金属固化模具与复合材料构件热不匹配导致的沿厚度方向和面内的固化残余应力发展,得到了固化后残余应力沿构件厚度方向和面内的分布情况,并分析了该残余应力分布的产生机制以及对构件固化后变形的影响.结果表明:复合材料与模具之间的热不匹配导致的固化残余应变沿构件厚度方向呈梯度分布,靠近模具端大于远离模具端,并且该应变会引起构件固化后的翘曲变形,变形以沿纤维方向为主.
参考文献
| [1] | 岳广全.整体化复合材料壁板结构固化变形模拟及控制方法研究[D].哈尔滨:哈尔滨工业大学,2010.Yue Guangquan.Study on simulation and control method of cure-induced deformation for integrated composite panel[D].Harbin:Harbin Institute of Technology,2010. |
| [2] | 岳广全,张博明,戴福洪,杜善义.固化过程中模具与复合材料构件相互作用分析[J].复合材料学报,2010,27(6):167-171.Yue Guangquan,Zhang Boming,Dai Fuhong,Du Shanyi.Interaction between mold and composite parts during curing process[J].Acta Materiae Compositae Sinica,2010,27(6):167-171. |
| [3] | Fernlund G,Rahman N,Courdji R,et al.Experimental and numerical study of the effect of cure cycle,tool surface,aspect ratio,and the lay-up on the dimensional stability of autoclaveprocessed composite parts[J].Composites Part A,2002,33(3):341-351. |
| [4] | Johnston A,Vaziri R,Poursartip A.A plane strain model for process-induced deformation of laminated composite structures[J].J Compos Mat,2001,35(16):1435-1469. |
| [5] | Radford D W,Rennick T S.Separating sources of manufacturing distortion in laminated composites[J].J Reinforced Plast Compos,2000,19(8):621-641. |
| [6] | Potter K D,Campbell M,Langer C,et al.The generation of geometrical deformations due to tool part interaction in the manufacture of composite components[J].Composites Part A,2005,36(2):301-308. |
| [7] | Satish K B,Lloyd V S.A linear finite element model to predict processing-induced distortion in FRP laminates[J].Composites Part A,2005,36(12):1666-1674. |
| [8] | Twigg G,Poursartip A,Fernlund G.An experimental method for quantifying tool-part shear interaction during composites processing[J].Compos Sci Technol,2003,63(13):1985-2002. |
| [9] | Twigg G,Poursartip A,Fernlund G.Tool-part interaction in composites processing Ⅰ:Experimental investigation and analytical model[J].Composites Part A,2004,35(1):121-133. |
| [10] | 沈真,章怡宁,黎观生,等.复合材料结构设计手册[M].北京:航空工业出版社,2001:40-51.Shen Zhen,Zhang Yining,Li Guansheng,et al.Composites structure design handbook[M].Beijing:Aviation Industry Press,2001:40-51. |
| [11] | Hughes William J.Metallic materials properties development and standardization[M].Columbus:Federal Aviation Administration,2010:440-451. |
| [12] | 万里冰,武湛君,张博明,等.光纤布拉格光栅监测复合材料固化[J].复合材料学报,2004,21(3):1-5.Wan Libing,Wu Zhanjun,Zhang Boming,et al.Cure monitoring of composites using fiber bragg grating sensors[J].Acta Materiae Compositae Sinica,2004,21(3):1-5. |
| [13] | 赵海涛.基于光纤传感技术的复合材料结构全寿命健康监测研究[D].哈尔滨:哈尔滨工业大学,2008.Zhao Haitao.Research on whole life health monitoring of composites structure based on fiber optic sensing technology[D].Harbin:Harbin Institute of Technology,2008. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%