高强韧钛合金作为结构材料在航空、航天等领域中具有不可或缺的地位,是钛合金发展最为重要的方向之一.综述了几种典型高强韧钛合金热加工过程中热变形激活能(QD)、流变应力及再结晶特征等最新研究进展,总结了合金成分、热加工参数及初始显微组织等因素对高强韧钛合金热加工变形的影响规律.最后,针对高强韧钛合金的热加工研究提出了建议,以期为现有高强韧钛合金的广泛应用及新型合金的研制提供参考.
参考文献
| [1] | S.L. Raghunathan;A.M. Stapleton;R.J. Dashwood.Micromechanics of Ti-10V-2Fe-3Al: In situ synchrotron characterisation and modelling[J].Acta materialia,200720(20):6861-6872. |
| [2] | Mansur Ahmed;Dmytro G. Savvakin;Orest M. Ivasishin;Elena V. Pereloma.The effect of ageing on microstructure and mechanical properties of powder Ti-5Al-5Mo-5V-1Cr-1Fe alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2014:89-97. |
| [3] | Mingpan Wan;Yongqing Zhao;Weidong Zeng.Effects of cold pre-deformation on aging behavior and mechanical properties of Ti-1300 alloy[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2015:383-388. |
| [4] | Lu, J. W.;Zhao, Y. Q.;Ge, P.;Niu, H. Z.;Zhang, Y. S.;Zhang, W.;Zhang, P. X..Microstructure and mechanical properties of new high strength beta-titanium alloy Ti-1300[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2015:182-189. |
| [5] | Ren, Y.;Wang, F.;Wang, S.;Tan, C.;Yu, X.;Jiang, J.;Cai, H..Mechanical response and effects of Β-to-α" phase transformation on the strengthening of Ti-10V-2Fe-3Al during one-dimensional shock loading[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:137-143. |
| [6] | 杨冬雨;付艳艳;惠松骁;叶文君;于洋;梁恩泉.高强高韧钛合金研究与应用进展[J].稀有金属,2011(4):575-580. |
| [7] | 卢轶;王俭;王红武.热处理工艺对TB2钛合金组织和性能的影响[J].稀有金属快报,2008(8):29-33. |
| [8] | Weiss I.;Semiatin SL..Thermomechanical processing of beta titanium alloys - an overview[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,19981/2(1/2):46-65. |
| [9] | Ghosh, A.;Sivaprasad, S.;Bhattacharjee, A.;Kar, S.K..Microstructure-fracture toughness correlation in an aircraft structural component alloy Ti-5Al-5V-5Mo-3Cr[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:61-67. |
| [10] | 葛鹏,周伟,赵永庆.热处理制度对Ti-1300合金组织和力学性能的影响[C].第十四届全国钛及钛合金学术交流会论文集,2010:1068-1072. |
| [11] | Boyer RR.;Venkatesh V.;Rack HJ..The influence of thermomechanical processing on the smooth fatigue properties of Ti-15V-3Cr-3Al-3Sn[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,19981/2(1/2):97-102. |
| [12] | J.K. Fan;J.S. Li;H.C. Kou.The interrelationship of fracture toughness and microstructure in a new near β titanium alloy Ti-7Mo-3Nb-3Cr-3Al[J].Materials Characterization,2014:93-99. |
| [13] | Fan, Jiangkun;Li, Jinshan;Kou, Hongchao;Hua, Ke;Tang, Bin;Zhang, Yudong.Influence of solution treatment on microstructure and mechanical properties of a near beta titanium alloy Ti-7333[J].Materials & design,2015Oct.15(Oct.15):499-507. |
| [14] | 张翥;惠松骁;刘伟.高强高韧TB10钛合金棒材研究[J].稀有金属,2006(2):221-225. |
| [15] | G. Srinivasu;Y. Natraj;A. Bhattacharjee;T.K. Nandy;G.V.S. Nageswara Rao.Tensile and fracture toughness of high strength β Titanium alloy, Ti-10V-2Fe-3Al, as a function of rolling and solution treatment temperatures[J].Materials & design,2013May(May):323-330. |
| [16] | 黄俊 .新型亚稳态β钛合金Ti-5Al-5V-5Mo-3Cr-0.5Fe循环变形机理及疲劳断裂性能研究[D].合肥工业大学,2011. |
| [17] | Kar, Sujoy Kumar;Suman, Swati;Shivaprasad, S.;Chaudhuri, Atanu;Bhattacharjee, Amit.Processing-microstructure-yield strength correlation in a near beta Ti alloy, Ti-5Al-5Mo-5V-3Cr[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2014:171-180. |
| [18] | A. Momeni.Effect of hot working on flow behavior of Ti-6Al-4V alloy in single phase and two phase regions[J].Materials & design,20108(8):P.3599. |
| [19] | Zhu, Y.;Zeng, W.;Feng, F.;Sun, Y.;Han, Y.;Zhou, Y..Characterization of hot deformation behavior of as-cast TC21 titanium alloy using processing map[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20113(3):1757-1763. |
| [20] | 周舸;丁桦;曹富荣;赵文娟;侯红亮;李志强.TC21合金的热压缩变形行为及变形机理[J].中国有色金属学报,2011(9):2111-2118. |
| [21] | 赵映辉;葛鹏;赵永庆;杨冠军;Weng Jianhong;汶建宏.Ti-1300合金的热变形行为研究[J].稀有金属材料与工程,2009(1):46-49. |
| [22] | H.Z. Zhao;L. Xiao;P. Ge;J. Sun;Z.P. Xi.Hot deformation behavior and processing maps of Ti-1300 alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2014:111-116. |
| [23] | Liu S.F.;Li M.Q.;Luo J.;Yang Z..Deformation behavior in the isothermal compression of Ti-5Al-5Mo-5V-1Cr-1Fe alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2014:15-22. |
| [24] | Warchomicka, F.;Poletti, C.;Stockinger, M..Study of the hot deformation behaviour in Ti-5Al-5Mo-5V-3Cr-1Zr[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,201128(28):8277-8285. |
| [25] | Jackson, M;Jones, NG;Dye, D;Dashwood, RJ.Effect of initial microstructure on plastic flow behaviour during isothermal forging of Ti-10V-2Fe-3Al[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,20091/2(1/2):248-254. |
| [26] | N.G. Jones;R.J. Dashwood;D. Dye.Thermomechanical processing of Ti-5Al-5Mo-5V-3Cr[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20081/2(1/2):369-377. |
| [27] | 周伟,葛鹏,赵永庆,李倩,冯亮,杨义.Ti-5553合金的高温变形行为[C].第十四届全国钛及钛合金学术交流会论文集,2010:852-856. |
| [28] | J.K. Fan;H.C. Kou;M.J. Lai;B. Tang;H. Chang;J.S. Li.Characterization of hot deformation behavior of a new near beta titanium alloy: Ti-7333[J].Materials & design,2013Aug.(Aug.):945-952. |
| [29] | Zherebtsov, S.V.;Murzinova, M.A.;Klimova, M.V.;Salishchev, G.A.;Popov, A.A.;Semiatin, S.L..Microstructure evolution during warm working of Ti-5Al-5Mo-5V-1Cr-1Fe at 600 and 800°C[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:168-176. |
| [30] | 卢金文;葛鹏;赵永庆.钛合金设计中合金元素影响机理的研究进展[J].稀有金属材料与工程,2014(4):775-779. |
| [31] | Z. GUO;A.P. MIODOWNIK;N. SAUNDERS.Influence of Stacking-Fault Energy on High Temperature Creep of Alpha Titanium Alloys[J].Scripta materialia,200612(12):2175-2178. |
| [32] | 欧阳德来 .TB6和TA15钛合金β锻组织演变及动态再结晶行为研究[D].南京航空航天大学,2011. |
| [33] | Li, C.;Zhang, X.-Y.;Zhou, K.-C.;Peng, C.-Q..Relationship between lamellar α evolution and flow behavior during isothermal deformation of Ti-5Al-5Mo-5V-1Cr-1Fe near Β titanium alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:668-674. |
| [34] | Li, C.;Zhang, X.-Y.;Li, Z.-Y.;Zhou, K.-C..Hot Deformation of Ti-5Al-5Mo-5V-1Cr-1Fe Near Β Titanium Alloys Containing Thin and Thick Lamellar α Phase[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:75-83. |
| [35] | Karasevskaya OP.;Ivasishin OM.;Semiatin SL.;Matviychuk YV..Deformation behavior of beta-titanium alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20031/2(1/2):121-132. |
| [36] | S.L. Raghunathan;R.J. Dashwood;M. Jackson;S.C. Vogel;D. Dye.The evolution of microtexture and macrotexture during subtransus forging of Ti–10V–2Fe–3Al[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20081/2(1/2):8-15. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%