欢迎登录材料期刊网

材料期刊网

高级检索

采用SPS法制备了p-型四元Al-Bi-Sb-Te合金,研究其微结构和热电性能.结果表明:Al含量直接影响材料的电、热学输运性能.当材料中Al替代Sb元素后,四元合金AlxBi0.5Sb15-xTe3(x=0.05~0.2)的电导率明显增大;在室温附近,x=0.1的合金其电导率可达3.3×104Ω-1·m-1,大约是三元Bi0.5Sb1.5 Te3合金的2倍;四元合金系的最小Seebeck系数α为115μV/K,说明材料属p-型半导体;当温度为411 K时,合金AlxBi0.5-Sb1.5-xTe3(x=0.1)的ZT值出现最大值,其值为0.58,是同温度下典型三元Bi0.5Sb1.5Te3合金的1.6倍.

参考文献

[1] N. Keawprak;Z.M. Sun;H. Hashimoto .Effect of sintering temperature on the thermoelectric properties of pulse discharge sintered (Bi_(0.24)Sb_(0.76))_2Te_3 alloy[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2005(1/2):236-244.
[2] Jiang J;Chen LD;Yao Q;Bai SQ;Wang Q .Effect of TeI4 content on the thermoelectric properties of n-type Bi-Te-Se crystals prepared by zone melting[J].Materials Chemistry and Physics,2005(1):39-42.
[3] K.-W. Cho;I.-H. Kim .Thermoelectric properties of the flash-evaporated n-type Bi_2Te_(2.4)Se_(0.6) thin films[J].Materials Letters,2005(8/9):966-970.
[4] Jiang J;Chen LD;Bai SQ;Yao Q;Wang Q .Fabrication and thermoelectric performance of textured n-type Bi-2(Te,Se)(3) by spark plasma sintering[J].Materials Science & Engineering, B. Solid-State Materials for Advanced Technology,2005(3):334-338.
[5] Yamanaka S;Kosuga A;Kurosaki K .Thermoelectric materials of Tl9BiTe6[J].Journal of Alloys and Compounds,2004,352:275-278.
[6] Ken Kurosaki;Hironori Uneda;Hiroki Muta .Thermoelectric properties of thallium antimony telluride[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2004(1/2):43-48.
[7] S. S. Kim;S. Yamamoto;T. Aizawa .Thermoelectric properties of anisotropy-controlled p-type Bi-Te-Sb system via bulk mechanical alloying and shear extrusion[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2004(1/2):107-113.
[8] Tritt M T .Thermoelectric materials:Holey and unholy semiconductors[J].Science,1999,283:804-805.
[9] Theodora Kyratsi;Duck-Young Chung;Mercouri G. Kanatzidis .Bi/Sb distribution and its consequences in solid solution members of the thermoelectric materials K_2Bi_(8-x)Sb_xSe_(13)[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2002(1/2):36-42.
[10] Hsu K F;Loo S;Kanatzidis M G et al.Cubic AgPbmSbTe2+m bulk thermoelectric materials with high figure of merit[J].Science,2004,303:818-821.
[11] Kim I H .Electric transport properties of the flash-evaporated p-type Bi0. 5 Sb1.5 Te3 thermoelectric thin films[J].Materials Letters,2000,44:75-79.
[12] Horak J;Cermak K;Koudelka L .Energy formation of antisite defects in doped Sb2 Te3 and Bi2 Te3 crystals[J].Journal of Physics and Chemistry of Solids,1986,47:805.
[13] L.E. Shelimova;O.G. Karpinskii;P.P. Konstantinov .Thermoelectric Properties of the Layered Compound GeBi_4Te_7 Doped with Copper[J].Inorganic materials,2002(8):790-794.
[14] 高敏;张景韶;Rowe D M.温差电转换及其应用[M].北京:兵器工业出版社,1996:52.
[15] Seo J;Park K;Lee D et al.Microstructure and thermoelectric properties of p-type Bi0. 5 Sb1. 5 Te3 compounds fabricated by hot pressing and hot extrusion[J].Scripta Materialia,1998,38:477-484.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%