A method based on die casting experiments and mathematic modeling is presented for the determination of the heat flow density (HFD) and interfacial heat transfer coefficient (IHTC) during the high pressure die casting (HPDC) process. Experiments were carried out using step shape casting and a commercial magnesium alloy, AM50. Temperature profiles were measured and recorded using thermocouples embedded inside the die.Based on these temperature readings, the HFD and IHTC were successfully determined and the calculation results show that the HFD and IHTC at the metal-die interface increases sharply right after the fast phase injection process until approaching their maximum values, after which their values decrease to a much lower level until the dies are opened. Different patterns of heat transler behavior were found between the die and the castingat different thicknesses. The thinner the casting was, the more quickly the HFD and IHTC reached their steady states. Also, the values for both the HFD and IHTC values were different between die and casting at different thicknesses.
参考文献
| [1] | J Allison;M Li;C Wolverton;X M Su .[J].Journal of the Minerals,Metals & Materials Society,2006,58:28. |
| [2] | A Hamasaiid;G Dour;M Dargusch;T.Loulou,C.Davidson G.Savage.[A].TMS The Minerals,Metals & Materials Society,2006:1205. |
| [3] | G. Dour;M. Darguscfa;C. Davidson .Development of a non-Intrusive heat transfer coefficient gau| and Its application to high pressure die casting Effect of the process parameters[J].Journal of Materials Processing Technology,2005(2):223-233. |
| [4] | K Ho;R D Pehlke .[J].Metallurgical and Materials Transactions,1985,16B:585. |
| [5] | H Cheng;J Xie;J Li .[J].COMPUTATIONAL MATERIALS SCIENCE,2004,29:453. |
| [6] | W D Griffiths .[J].Metallurgical and Materials Transactions,2000,35B:299. |
| [7] | C P Hallam;W D Griffiths .[J].Metallurgical and Materials Transactions,2004,35B:721. |
| [8] | C.A. Santos;J.M.V. Quaresma;A. Garcia .Determination of transient interfacial heat transfer coefficients in chill mold castings[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2001(1/2):174-186. |
| [9] | F. Lau;W. B. Lee;S. M. Xiong;B. C. Liu .A study of the interfacial heat transfer between an iron casting and a metallic mould[J].Journal of Materials Processing Technology,1998(1/3):25-29. |
| [10] | C W Nelson.[A].Cleveland,OH,1970:1. |
| [11] | J Papai;C Mobley.[A].Detroit,MI,1991:377. |
| [12] | J V Beck;B Blackwell;C R ST Clair.Inverse Heat Conduction.Ill-posed Problems[M].New York:Wiley Intersc,1985:140. |
| [13] | J V Beck;B Blackwell;A Haji-sheikh .[J].International Journal of Heat and Mass Transfer,1996,39:3649. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%