The effects of fibre/matrix bonding,fabric density,fibre volume fraction and bundle size on microstructure,mechanical properties and failure mechanisms in carbon fibre reinforced composites (plastic and carbon matrix) have been investigated.The microstructure of unloaded and cracked samples was studied by optical microscopy and scanning electron microscopy (SEM),respectively whereas the mechanical behaviour was examined by 3-point bending experiments.Exclusively one type of experimental resole type phenolic resin was applied.A strong fibre/matrix bonding,which is needed for high strength of carbon fibre reinforced plastic (CFRP) materials leads to severe composite damages during the pyrolysis resulting in low strength,brittle failure and a very low utilisation of the fibres strain to failure in C/C composites.Inherent fabric parameters such as an increasing fabric density or bundle size or a reduced fibre volume fraction introduce inhomogenities to the CFRP's microstructure.Results are lower strength and stiffness whereas the strain to failure increases or remains unchanged.Toughness is almost not affected.In C/C composites inhomogenities due to a reduced bundle size reduce strain to failure,strength,stiffness and toughness.Vice versa a declining fibre volume fraction leads to exactly the opposite behaviour.Increasing the fabric density (weight per unit area) causes similar effects as in CFRPs.
参考文献
| [1] | W Krenkel.Ceramic Matrix Composites[M].Weinheim:Wiley-VCH,2003 |
| [2] | A G Odcshi .Contribution to Processing of C-Fiber Reinforced Ceramic Matrix Composites[D].TU Chemnitz,2001. |
| [3] | G Ren;P J Hogg;D H Woolstencroft .[J].British Ceramic Transactions,2004,103(04):158. |
| [4] | F Ansorge .Characterization of Failure Mechanisms of Liquid Siliconized C/SiC Fiber Ceramics[D].Universitat Karlsruhe,1995. |
| [5] | F Streieher.Mechanical Behavior of Unidirectional Fiber Reinforced and Bi-directional Woven Fabric Reinforced Ceramics (SiC/SiC)[M].Der Andere Verlag,Osnabrck,2000 |
| [6] | Carbon Bikes;Parts Z.[J].Bike sport news,2004(zk):Nr6,S1. |
| [7] | E Fitzer.Carbon Fibres and their Composites[M].Beilin:Springer-Verlag,1985 |
| [8] | K M Beinborn .Processing of Improved C-Fiber Reinforced Carbon with High-Tenacity (Ht)-C-Fibers and Phenolic Resins by Means of Controlled Fiber-Matrix-Bonding[D].Universitat Karlsruhe,1996. |
| [9] | S R Dhakate;V K Parashar;V Raman;O P Bahl and P D Sahare .[J].Journal of Materials Science Letters,2000,19:1575. |
| [10] | G Savage.Carbon-Carbon Composites[M].London:Chapman and Hall,1993 |
| [11] | F Hoecker .Effects of Interfaces in High-Performance Composites with Polymeric Matrices[D].Universitat Kaiserslautern,1996. |
| [12] | J Gulyás;E Fáldes;A Lázár;B Pukánszky .[J].Composites Part A:Applied Science and Manufacturing,2001,32(3-4):353. |
| [13] | M A Montes-Morán;A Martnez-Alonso;J M D Tascón;R J Young .[J].Composites Part A:Applied Science and Manufacturing,2001,32(3-4):361. |
| [14] | R.Y.Lin;S.G.Fishman.Control of Interfaces in Metal and Ceramic Composites,The Minerals[M].Metals and Materials Society,Warrendale,1994 |
| [15] | L Hahn;F Ansorge;A Brückner-Foit .[J].Journal of Materials Science,1997,32:5467. |
| [16] | J H Miller;P K Liaw;J D Landes .[J].Materials Science and Engineering,2001,317A:49. |
| [17] | F. KUN;H. J. HERRMANN .Damage development under gradual loading of composites[J].Journal of Materials Science,2000(18):4685-4693. |
| [18] | Norm DIN EN ISO 14125:Fiber Reinforced Polymers:Determination of Bending Properties[M].Beuth Verlag,Berlin,1998 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%