欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料导报
  4. 高铝奥氏体不锈钢研究现状及发展趋势

材料导报, 2013, 27(17): 101-104.

高铝奥氏体不锈钢研究现状及发展趋势

孟倩 1, , 喇培清 2, , 撒兴瑞 3,

1.兰州理工大学有色金属国家重点实验室,兰州730050;兰州交通大学机电工程学院,兰州730070

2.兰州理工大学有色金属国家重点实验室,兰州730050

3.兰州理工大学有色金属国家重点实验室,兰州730050

基金项目:   国家自然科学基金(51164022)  

关键词： 高铝奥氏体不锈钢 , 成分设计 , 抗氧化性 , 抗蠕变性

Research Status and Development Trend of High-aluminum Austenitic Stainless Steel

MENG Qian 1, , LA Peiqing 2, , SA Xingrui 3,

1.兰州理工大学有色金属国家重点实验室,兰州730050;兰州交通大学机电工程学院,兰州730070

2.兰州理工大学有色金属国家重点实验室,兰州730050

3.兰州理工大学有色金属国家重点实验室,兰州730050

Keywords： high-aluminum austenitic stainless steel , compositon design , oxidation resistance , creep resistance

高铝奥氏体不锈钢是一种通过表面形成Al2O获得优异抗氧化性的新钢种.综述了近年来国内外高铝奥氏体不锈钢的研究现状,主要包括合金成分设计、Al元素对奥氏体不锈钢性能(抗氧化性能、抗蠕变性能、拉伸性能)的影响,并对Mn代Ni高铝奥氏体不锈钢做了简单介绍,最后展望了高铝奥氏体不锈钢未来的发展趋势.

参考文献

[1] 孟繁茂;付俊岩.现代含铌不锈钢[M].北京:冶金工业出版社,2004
[2] 迟成宇,于鸿垚,谢锡善.600℃超超临界电站锅炉过热器及再热器管道用先进奥氏体耐热钢的研究与发展[J].世界钢铁,2012(04):50-65.
[3] Ramakrisnan V;Mcgurty J A;Jayarman N .Oxidation of high-aluminum austenitic stainless steels[J].Oxidat Metals,1988,30(3-4):185.
[4] Satyanarayana D;Malakondaiah G;Sarma D S .Steady state behaviour of NiAl harden austenitic steel[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2002,323(1-2):119.
[5] Fujioka T;Kinugasa M;IizumiI S et al.Heat resistant austenitic stainless steel[P].US,3989514,1976-11-02.
[6] Mcgurtyj A .Austenitic iron alloys[P].US,4086085,1978.
[7] Pivin J C .Oxidation mechanism of Fe-Ni-20-25Cr-5Al alloysinfluence of small amounts of yttrium on oxidation kinetics and oxide adherence[J].Corrosion Science,1980,20(03):351.
[8] Pint B A;Peraldi R;Maziasz P J .The use of model alloys to develop corrsion-resistant stainless steel[J].Materials Science Forum,2004,461-464:815.
[9] Yamamoto Y;Brady M P;Lu Z P et al.Alumina-forming austenitic stainless steels strengthened by Laves phase and MC carbide precipitates[J].Metals Mater Soc ASM Int,2007,37:2737.
[10] Yamamoto Y;Santella M L;Brady M P et al.Effect of alloying additions on phase equilibria and creep resistance of alumina-forming austenitic stainless steel[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2009,40(08):1868.
[11] Yamamoto Y;Brady MP;Lu ZP;Maziasz PJ;Liu CT;Pint BA;More KL;Meyer HM;Payzant EA .Creep-resistant, Al2O3-forming austenitic stainless steels.[J].Science,2007(5823):433-436.
[12] Brady M P;Yamamoto Y;Santella M L et al.Effects of minor alloy additions and oxidation temperature on protective alumina scale formation in creep-resistant austenitic stainless steel[J].Scripta Materialia,2007,57(12):1117.
[13] Elizabeth J. Opila .Volatility of Common Protective Oxides in High-Temperature Water Vapor: Current Understanding and Unanswered Questions[J].Materials Science Forum,2004(Pt.2):765-774.
[14] Sharafi S;Farhang MR .Effect of aluminizing on surface microstructure of an HH309 stainless steel[J].Surface & Coatings Technology,2006(16/17):5048-5051.
[15] Brady M P;Yamamoto Y;Lu Zhaoping .Alumina-forming austenitic:A new class of heat-resistant stainless steels[J].Stainless Steel World,2008,3:23.
[16] M.P.Brady;B.Gleeson .Alloy design strategies for promoting protective oxide- scale formation[J].JOM,2000(1):16-21.
[17] Jussila P;Lahtonen K;Lampimaki M;Hirsimaki M;Valden M .Influence of minor alloying elements on the initial stages of oxidation of austenitic stainless steel materials[J].Surface and Interface Analysis: SIA: An International Journal Devoted to the Development and Application of Techniques for the Analysis of Surfaces, Interfaces and Thin Films,2008(8):1149-1156.
[18] Young D J;Pint B A .Chromium volatilization rates from Cr2O3 scales into flowing gases containing water vapor[J].Oxidat Metals,2006,66(3-4):137.
[19] Brady M P;Yamamoto Y;Pint B A et al.On the loss of protective scale formation in creep-resistant,alumina-forming austenitic stainless steels at 900℃ in air[J].Materials Science Forum,2008,595-598:725.
[20] Yamamoto Y;Brady M P;Santella M L.Developmnt of intergrated flexi-burn dual oxidant CFB power plant[A].Clearwater,FL,2008
[21] Brady M P;Yamamoto Y;Santella M L et al.Composition,microstructure and water vapor effects on internal / external oxidation of alumina-forming ustenitic sainless steels[J].Oxidat Metals,2009,72:311.
[22] M.P. Brack;V. Yamamoto;M.L. Sanlella .The Development of Alumina-Forming Austenitic Stainless Steels for High-Temperature Structural Use[J].JOM,2008(7):12-18.
[23] Xu Xiangqi;Zhang Xiaofeng;Chen Guoliang et al.Improvement of high-temperature oxidation resistance and strength in alumina-forming austenitic stainless steel[J].Materials Letters,2011,65(21-22):3285.
[24] Stott F H;Wood G C;Stringer J .The influence of alloying elements on the development and maintenance of protective scales[J].Oxidat Metals,1995,44(1-2):113.
[25] Brady M P;Unocic K A;Lance M J et al.Increasing the upper temperature oxidation limited of alumina forming austenitic stainless steel in air with water vapor[J].Oxidat Metals,2011,75(5-6):337.
[26] 闫兴义,孙玉福,张炎,王美喜.Al对ZG40Cr25Ni20抗磨耐热钢高温抗氧化性的影响[J].铸造技术,2010(03):292-294.
[27] Xu Xiangqi;Zhang Xiaofeng;Sun Xiaoyang et al.Effect of silicon additions on the oxide scale formation of an aluminaforming austenitic alloy[J].Corrosion Science,2012,65:317.
[28] Sourmail T. .Precipitation in creep resistant austenitic stainless steels [Review][J].Materials Science and Technology: MST: A publication of the Institute of Metals,2001(1):1-14.
[29] Taneike M;Abe F;Sawada K .Creep-strenghtening of steel at high temperature using nano-sized carbonitride[J].Nature,2003,424(6946):294.
[30] Maziasz P J;Shingledecker J P;Evans N D .CF8C-plus heatresistant cast stainless steel[J].Current Advances in Materials and Processes,2008,10:27.
[31] Yamamoto Y;Takeyama M;Lu Z P et al.Effect of intermetallic phase precipitation on creep properties of Fe-20Cr30Ni-2Nb base alloys[J].Intermetallics,2008,16(03):453.
[32] Bei H;Yamamoto Y;Brady M P .Ageing effects on the mechanical properties of alumina-forming austenitic stainless steel[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2009,527:2079.
[33] Satyanarayana D V V;Malakondaiah A G;Sarmad S .Characterization of the age-harding behavior of a precipitationhardenable austenitic steel[J].Materials Characterization,2001,47(01):61.
[34] Yamamoto Y;Santella M L;Liu C T et al.Evaluation of Mn substitution for Ni in alumina-forming austenitic stainless steels[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2009,524(1-2):176.
[35] Xu Xiangqi;Zhang Xiaofeng;Lu Zhaoping .Roles manganese effects on the oxidation resistance of the alumina-forming austenitic steels at above 800 ℃[J].Oxidat Metals,2012,78(5-6):349.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net