采用钎料改性工艺制备了Sn-3.5Ag0.6Cu合金,用润湿平衡法测试了液态Sn-3.5Ag0.6Cu钎料在铜基体表面的润湿性,研究了钎料制备工艺、钎剂卤素含量、浸渍温度和时间等因素对润湿性能的影响.结果表明:采用改性工艺可增强钎料的润湿性能,当钎剂卤素含量为0.4wt%、在270℃下浸渍2～3s时,液态Sn-3.5Ag0.6Cu钎料对铜表面的润湿性可以达到最佳状态.指出降低钎料的熔点和液态表面张力是提高润湿性的关键.
参考文献
| [1] | Glazer J .Metallurgy of low temperature Pb-free solders for electronic assembly[J].International Metals Reviews,1995,40:65. |
| [2] | Abtew M;Selvaduray G .Lead-free solders in microelectronics[J].Materials Science and Engineering,2000,27:95. |
| [3] | Lee N C .Lead-free soldering-where the world is going[J].Advancing Microelectronics,1999,26:29. |
| [4] | Lee N C .Getting ready for Lead-free solders[J].Soldering and Surface Mount Technology,1997,28:65. |
| [5] | 张曙光,何礼君,张少明,石力开.绿色无铅电子焊料的研究与应用进展[J].材料导报,2004(06):72-75. |
| [6] | Anderson I E;Foley J C;Cook B A et al.Alloying effects in near-eutectic Sn-Ag-Cu solder alloys for improved micro-struc-tural stability[J].Journal of Electronic Materials,2001,30:1050. |
| [7] | Anderson I E;Cook B A;Harringa J L et al.Sn-Ag-Cu solders and solder joints: alloy development, microstructure, and properties[J].Journal of The Minerals,Metals & Materials Society,2002,6:26. |
| [8] | Shawkret Ahat;Mei Sheng;Le Luo .Effects of static thermal aging and thermal cycling on the microstructure and shear strength of Sn_(95.5)Ag_(3.8)Cu_(0.7) solder joints[J].Journal of Materials Research,2001(10):2914-2921. |
| [9] | Song H G;Morris J W Jr et al.The creep properties of lead-free solder joints[J].Journal of The Minerals,Metals & Materials Society,2002,6:30. |
| [10] | Kisiel R;Morawska Z;Boracki J.Lead-free solders for high temperature applications[A].,1998:203. |
| [11] | 陈志刚,史耀武,夏志东.微量混合稀土对SnAgCu钎料合金性能的影响[J].电子工艺技术,2003(02):53-58. |
| [12] | ParkJ Y;Kang C S et al.The analysis of the withdraw force curve of the wetting cure using 63Sn-37Pb and 96. 5Sn-3.5Ag eutectic solders[J].Journal of Electronic Materials,1999,28:1256. |
| [13] | 邵光杰.物理化学[M].哈尔滨:哈尔滨工业大学出版社,2002 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%