铝合金热轧过程中显微组织演变的模拟研究

材料导报, 2000, 14(12): 9-11.

铝合金热轧过程中显微组织演变的模拟研究

彭大暑 ^1, , 张辉 ^2, , 杨立斌 ^3, , 孟力平 ^4,

1.中南大学材料科学与工程系，长沙410083

2.中南大学材料科学与工程系，长沙410083

3.中南大学材料科学与工程系，长沙410083

4.中南大学材料科学与工程系，长沙410083

关键词：铝合金 , 热轧 , 显微组织 , 实验模拟 , 数值模拟

Simulation on Microstructural Evolution during Hot-rolling of Aluminum Alloys

综述铝合金热轧过程中显微组织演变实验模拟和数值模拟的研究现状。目前研究的重点内容是进一步开发利用各种先进的热变形实验模拟设备和技术，揭示材料在热和力作用下所产生的各种物理冶金学现象；建立定量的力学、物理冶金学模型；利用计算机技术对铝合金热轧过程中显微组织演变进行定量模拟，以便最后在生产实际中直接合理地控制热轧工艺和提高产品质量。

参考文献

[1]	McQueen H J.[J].Journal of The Minerals,Metals & Materials Society,1998:28.
[2]	Chia E H;McQueen H J.Microstructural Control in Aluminum Alloys: Deformation[J].Recovery and Recrystallisation,PA,TMS,New York,1985
[3]	Sellars C M;C A Pampillio;H Biloni;D.E.Embury.Aluminum Transformation Technology and Application[J].ASM,1978:405.
[4]	Raghunathan N;Sheppard T .[J].Materials Science and Technology,1989,5:194.
[5]	HOLLINSHEADPA;Sheppard T .[J].Materials Science and Technology,1987,3:1019.
[6]	Sheppard T;Zaidi M A .[J].Metals and Technology,1982,9:52.
[7]	Zaidi M A;Sheppard T .[J].Metals Science,1982,16:229.
[8]	张辉,钟华苹,彭大署.工业纯铝多道次热轧工艺的实验模拟[J].轻合金加工技术,1999(10):20.
[9]	张辉;钟华萍;彭大暑 .[J].中南工业大学学报(自然科学版),1999,30:407.
[10]	Zhang Hui;Liu Yuying;Peng Dashu et al.[J].金属学报(英文版),2000(13):655.
[11]	Liu Yuying,Zhang Hui,Peng Dashu,Wang Caikun.EXPERIMENTAL SIMULATION ON CONTROL ROLLING PROCESS OF 6201 ALUMINUM ALLOY[J].中国有色金属学会会刊（英文版）,1999(02):318-321.
[12]	Puchi E S;Beynon J;Sellars C M.in ‘THERMEC88',Proc.Int.Conf.On Physical metallurgy of thermo-mechanical processing of steels and other metals'[J].Tokyo Japan June 1988 Iron and Steel Institute Japan:572.
[13]	MARTIN S;Gutirrez I;Urcola J J .[J].Static Mater Sci Technol,1993,9:874.
[14]	Gutierrez I;Castro F;Urcola J J et al.[J].Materials Science and Technology,1990,6:819.
[15]	McQueen H J .[J].Journal of Materials Processing Technology,1993,37:3.
[16]	HIRSCHJ.Modeling of microstructures and proerties for industrial sheet production,Lecture held at the department of materials and engineering[J].CSUT,1999
[17]	Chen B K;Choi S K;Thomson P F .[J].Res.Mechanica,1991,31:455.
[18]	Chen B K;Thomson P F;Choi S K .[J].Journal of Materials Processing Technology,1992,30:115.
[19]	Chen B K;Choi S K;Thomson P F .[J].International Journal of Mechanical Sciences,1989,31:839.
[20]	Chen B K;Thomson P F;Choi S K .[J].Materials Science and Technology,1992,8:72.
[21]	Timothy S P;Yiu H L;Fine J M et al.[J].Materials Science and Technology,1991,7:255.
[22]	Shi H;McLaren AJ;Sellars CM;Shahani R;Bolingbroke R .Constitutive equations for high temperature flow stress of aluminium alloys[J].Materials Science and Technology: MST: A publication of the Institute of Metals,1997(3):210-216.
[23]	Kim H;Lee S M;Altan T .[J].Journal of Materials Processing Technology,1996,59:113.
[24]	Shen G;Semiatin S L;Altan T .[J].Journal of Materials Processing Technology,1993,36:303.
[25]	Oh S I;Lahoti G D;Altan T.[J].Journal of Mechanical Working and Technology,1982(06):227.
[26]	Altan T;Oh S I.[J].Advanced Technology of Plasticity,1990(04):1779.
[27]	Oh S I;Wu W T;Tang J et al.[J].Journal of Materials Processing Technology,1991,27:25.
[28]	Zhe W;Tingquan L;Akira K et al.[J].Journal of the Japan Society for Technology of Plasticity,1999(40):88.
[29]	Altan T;Vazquez V .[J].Journal of Materials Processing Technology,1997,71:49.
[30]	张辉 .铝合金多道次热轧显微组织演变的模拟研究[D].中南工业大学,2000.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

铝合金热轧过程中显微组织演变的模拟研究

Simulation on Microstructural Evolution during Hot-rolling of Aluminum Alloys

参考文献