欢迎登录材料期刊网

材料期刊网

高级检索

简要介绍了近年来Si、Al、K掺杂对钼丝再结晶温度的提高和高温力学性能的改善方面的研究,同时综合分析了Si、Al、K掺杂对钼的作用机理.

参考文献

[1] 向铁根.钼冶金[M].长沙:中南大学出版社,2002
[2] 罗振中.钼的应用及其发展[J].中国钼业,2003(02):7-10.
[3] 王慧芳 .掺杂钼板材在我国的发展与前景[J].中国钼业,1997,21(02):95.
[4] 钟培全.钼与钼合金的应用及其加工方法[J].中国钼业,2000(05):15-16.
[5] 董允杰,许洁瑜.我国钼丝制品概况及建议[J].中国钼业,2001(04):29-31.
[6] 陈响明 .变形钼丝再结晶过程的电境观察[J].中国钼业,1997,21(06):53.
[7] 李庆奎 .添加微量元素对钼丝组织性能的影响[J].中国钼业,1995,19(10):26.
[8] 徐志昌 .改性元素对钼制品性能的影响[J].中国钼业,1997,21(10):41.
[9] 程仕平 等.掺杂钼丝的组织和性能[J].中国钼业,1999,23(08):10.
[10] WANG Jin-shu;ZHOU Mei-ling;ZUO Tie-yong .Effect of La_2O_3 nanoparticles on properties of molybdenum powder[J].Transactions of Nonferrous Metals Society of China,2001(6):860-862.
[11] MYOUNG KI YOO;YUTAKA HIRAOKA;JU CHOI .Recrystallization of Molybdenum Wire Doped with Lanthanum Oxide[J].International Journal of Refractory Metals & Hard Materials,1995(4):221-227.
[12] 李淑霞,魏光明,王思清.钼镧合金丝的组织及性能[J].稀有金属材料与工程,1999(03):186-188.
[13] 韩强,张相一,陈家松,赵宝华.添加稀土元素对钼基金属组织和性能的影响[J].中国钼业,2001(03):36-38.
[14] 张久兴,周美玲,周文元,王金淑,聂祚仁,左铁镛.稀土钼合金力学和热发射性能的研究[J].稀有金属,2002(02):124-128.
[15] 高家诚,王勇,李静,羊建高,李伟勤,周永贵.复合掺杂钼丝的组织和性能研究[J].功能材料,2003(05):528-529.
[16] MYOUNG KI YOO;YUTAKA HIRAOKA;JU CHOI .Recrystallization of Molybdenum Wire Doped with Potassium-Silicate[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1995(4):801-816.
[17] IorioL et al.Doped particle characterization and bubble evolution in aluminum potassium silicon doped molybdenum wire[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2002,33(11):3349.
[18] JuChoi.The process of bubble formation in the hot isostatic pressing treated,doped molybdenum wire[M].Metallurgical Transactions A,1990:919.
[19] ewlayP et al.Observations on the evolution of potassium bubble in tungsten ingots during sintering[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1992,23(01):121.
[20] ewlayP;Briant C L .Discussion of evidence for the existence of potassium bubbles in ASK-doped tungsten wire[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1991,22(09):2153.
[21] 钟培全 .K-Si掺杂钼中的弥散相分析[J].中国钼业,1994,18(06):15.
[22] 金和玉 .再结晶钼合金的晶界偏析及其对脆性晶间断裂的影响[J].中国钼业,1995,19(08):27.
[23] 向铁根 等.钼丝弯折断裂的探讨[J].中国钼业,1997,21(06):47.
[24] 王慧芳 .掺杂钼板材的性能研究[J].中国钼业,1994,18(11):26.
[25] 刘光跃 .耐高温高强度钼丝的研究[J].中国钼业,1994,18(11):38.
[26] Yutaka Hiraoka;Tetsuji Hoshika .Parameter representing low-temperature fracture strength in molybdenum having an elongated and large grain structure[J].International Journal of Refractory Metals & Hard Materials,1999(5):339-344.
[27] 张久兴,刘科高,王金淑,周美玲,左铁镛.放电等离子烧结钼的组织和性能[J].中国有色金属学报,2001(05):796-800.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%