采用透射电镜及附带能谱(TEM-EDS)对K418高温合金涡轮盘和42CrMo合金钢转轴激光焊焊缝的微观组织进行了分析.结果表明:焊缝主要由树枝状非平衡凝固的FeCrNiC(γ)固溶体组成,此外,还有少量细小、弥散的Ni_3Alγ'相、Laves颗粒和少量MC碳化物分布在树枝晶之间区域;根据热动力学原理对形成这一组织特征的原因进行了简要讨论.
Microstructure of laser welded seam of K418 superalloy turbo disk and alloy steel 42CrMo shaft was characterized by transmission electron microscopy (TEM) and energy dispersive spectrometer (EDS). Results show that the laser welded seam has non-equilibrium solidified microstructure consisting of FeCrNiC (γ) austenite solid solution dendrites as the dominant and some fine and dispersed Ni_3Alγ' phase and Laves particles as well as little amount of MC carbides distributed in the interdendritic regions. Mechanism of the formation of the microstructure is briefly discussed based on thermal-dynamics principles.
参考文献
| [1] | 谭真;郭广文.工程合金热物性[M].北京:冶金工业出版社,1994 |
| [2] | 杜随更,傅莉,王晋伟,曹营.K418高温合金与42CrMo钢异种金属摩擦焊接头碳化物带形成机制[J].中国有色金属学报,2003(02):323-327. |
| [3] | 杜随更,傅莉,曹营,王晋伟.K418涡轮盘和42CrMo轴摩擦焊接头的强化[J].西北工业大学学报,2004(01):112-115. |
| [4] | 虞钢;虞和济.集成化激光智能加工工程[M].北京:冶金工业出版社,2002 |
| [5] | Mai T A;Spowage A C .Characterization of dissimilar joints in laser welding of steel-koval,copper-steel and copper-aluminium[J].Materials Science and Engineering A,2004,374:224-233. |
| [6] | A. Ribolla;G. L. Damoulis;G. F. Batalha .The use of Nd: YAG laser weld for large scale volume assembly of automotive body in white[J].Journal of Materials Processing Technology,2005(0):1120-1127. |
| [7] | Kuo TY;Lin HC .Effects of pulse level of Nd-YAG laser on tensile properties and formability of laser weldments in automotive aluminum alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1-2):281-289. |
| [8] | 王红英,李志军.AZ61镁合金激光焊接接头的组织与性能[J].中国有色金属学报,2006(08):1388-1393. |
| [9] | O.A. Idowu;O.A. Ojo;M.C. Chaturvedi .Effect of heat input on heat affected zone cracking in laser welded ATI All vac 718Plus superalloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(0):389-397. |
| [10] | Wang A H;Xu H G;Yang P et al.Nd:YAG laser butt welding of a 12 vol% SiC particulate-reinforced magnesium alloy composite[J].Materials Letters,2007,61:4023-4026. |
| [11] | 关振中.激光加工工艺手册[M].北京:中国计量出版社,1998 |
| [12] | 庞铭,虞钢,刘兆,郑彩云,王立新,宁伟健.K418与42CrMo异种金属的激光穿透焊接[J].中国激光,2006(08):1122-1126. |
| [13] | Xiu-Bo Liu;Gang Yu;Ming Pang;Ji-Wei Fan;Heng-Hai Wang;Cai-Yun Zheng .Dissimilar autogenous full penetration welding of superalloy K418 and 42CrMo steel by a high power CW Nd:YAG laser[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2007(17):7281-7289. |
| [14] | LiuXB;Yu G;Guo J et al.Research on laser welding of cast Ni-based superalloy K418 turbo disk and alloy steel 42CrMo shaft[J].Journal of Alloys and Compounds,2007,453:371-378. |
| [15] | Radhakrishna C.;Rao KP. .THE FORMATION AND CONTROL OF LAVES PHASE IN SUPERALLOY 718 WELDS[J].Journal of Materials Science,1997(8):1977-1984. |
| [16] | Janaki Ram G D;Venugopal Reddy A;Prasad Rao K et al.Control of laves phase in incol718 GTA welds with current pulsing[J].Science and Technology of Welding and Joining,2004,9(05):390-398. |
| [17] | G.D. Janaki Ram;A. Venugopal Reddy;K. Prasad Rao .Microstructure and tensile properties of Inconel 718 pulsed Nd-YAG laser welds[J].Journal of Materials Processing Technology,2005(1):73-82. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%