在双辊连续铸轧过程中施加电磁-超声能场制备出1060铝合金铸轧板坯,经不同冷轧变形量的冷轧后退火,制备出系列铝板带,从晶粒大小、形态和取向等方面分析电磁-超声能场对铝板带再结晶组织与织构的影响.结果表明:电磁-超声能场可使铝合金铸轧板坯的平均晶粒尺寸减小50%,使第二相均匀弥散分布在晶内和晶界上,并能降低织构取向密度,使织构组分漫散分布;电磁-超声能场可加大铝合金铸轧板在冷轧-退火过程中的再结晶程度,并获得更加细小均匀的再结晶组织;电磁-超声能场还可降低铝合金铸轧板冷轧-退火后的再结晶织构强度,抑制晶粒的择优取向,提高铝合金铸轧板的深冲成型性能.
参考文献
[1] | 潘复生;张丁非.铝合金及应用[M].北京:化学工业出版社,2007:70-79. |
[2] | 肖亚庆.铝加工技术实用手册[M].北京:冶金工业出版社,2005:13-27. |
[3] | 程杰.铝及铝合金连续铸轧带坯生产[M].长沙:中南大学出版社,2010:5-6. |
[4] | 陈守东,陈敬超.铝双辊连续铸轧凝固微观组织的数值模拟[J].中国有色金属学报(英文版),2012(06):1452-1456. |
[5] | Z.J. Li;G. Winther;N. Hansen .Anisotropy of plastic deformation in rolled aluminum[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(0):199-202. |
[6] | 屈平,向群.我国铝板带市场发展综述[J].铝加工,2006(01):18-20. |
[7] | EI-BASSYOUNI T A .Effect of electromagnetic forces on aluminum cast structure[J].Light Metals,1983,33(12):733-742. |
[8] | V. Metan;K. Eigenfeld;D. Rabiger .Grain size control in Al-Si alloys by grain refinement and electromagnetic stirring[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2009(1/2):163-172. |
[9] | Metan, V.;Eigenfeld, K..Controlling mechanical and physical properties of Al-Si alloys by controlling grain size through grain refinement and electromagnetic stirring[J].The European physical journal: Special topics,2013:139-150. |
[10] | 李金涛;许光明;崔建忠;雷鹏 .电磁场对5082铝合金铸轧板材组织的影响[J].稀有金属材料与工程,2012,41(02):558-560. |
[11] | 赵啸林,毛大恒,陈大根.将电磁场引入连续铸轧的新技术探讨[J].中国有色金属学报,1995(04):145-149. |
[12] | G. I. Eskin .Broad prospects for commercial application of the ultrasonic (cavitation) melt treatment of light alloys[J].Ultrasonics sonochemistry,2001(3):319-325. |
[13] | Eskin GI.;Eskin DG. .Production of natural and synthesized aluminum-based composite materials with the aid of ultrasonic (cavitation) treatment of the melt[J].Ultrasonics sonochemistry,2003(4/5):297-301. |
[14] | MAO Da-heng,ZHANG Yun-fang,NIE Zhao-hui,LIU Qiao-hong,ZHONG Jue.Effects of ultrasonic treatment on structure of roll casting aluminum strip[J].中南工业大学学报(英文版),2007(03):363-369. |
[15] | 潘秋红,黄瑶,温晓静,王雷刚,刘囝.深冲用工业纯铝板材的各向异性研究[J].矿冶工程,2008(02):87-90. |
[16] | MISZCZYK M;PAUL H;DRIVER J H .Microstructure and texture evolution during annealing of plane strain compressed Al and Al-1%Mn alloy single crystals[J].ARCHIVES OF METALLURGY AND MATERIALS,2011,56(04):933-938. |
[17] | Tang JG;Zhang XM;Deng YL;Du YX;Chen ZY .Texture decomposition with particle swarm optimization method[J].Computational Materials Science,2006(2):395-399. |
[18] | 毛大恒,赵苏琨,李建平,扶宗礼,石琛.冷轧变形量对电磁/超声铸轧铝板织构和性能的影响[J].材料工程,2013(06):12-17. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%