An RF system for the CSRe (cooling storage experimental ring) is designed and manufactured domestically. The present paper mainly describes the RF system design in five main sections:ferrite ring, RF cavity, RF generator, low level system and cavity cooling. The cavity is based on a type of coaxial resonator which is shorted at the end with one gap and loaded with domestic ferrite rings. The RF generator is designed in the push-pull mode and the low level control system is based on a DSP+FGPA+DDS+USB interface and has three feedback loops. Finally we give the results of the measurement on our system.
参考文献
[1] | XIA J W.HIRFL Status and HIRFL-CSR Project in Lanzhou[A].Japan:KEK,Ksukuba,1998:234-236. |
[2] | Gardner I S K.Ferrite Dominated Cavities[M].Rutherford Ap-pleton Laboratory,Chilton,England:CERN Accelerator School,1998:367-368. |
[3] | Katayama Takeshi;Yoshizawa Morio;Watanabe Shin-Ichi et al.[J].Nuclear Instruments and Methods in Physics Research,1993,336(03):391. |
[4] | XU Zhc;DUAN Ya-Juan;ZHAO Hong-Wei et al.[J].Nuclear Physics Review,2008,25(03):249. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%