研究了等离子喷涂Ni基WC型自熔合金涂层炉熔处 理前后的组织形态。 结果表明， 经重 熔处理后， 涂层由富含孔隙、 未熔颗粒的层状结构转变为致密的结晶组织结构， 涂层与 基材 由机械咬合结合转变为冶金反应扩散结合， 涂层的内聚强度和涂层/基材的结合强度都得以 显著改善。 涂层的相组成在重熔前后变化不大， 均主要由γ-Ni固溶体相， Ni-B(N i2B)， Cr-B (CrB)， Ni-Si(Ni5Si2)和WC硬质相等组成。 由于等离子喷涂是 一种快速 凝固工艺， 在喷涂态涂层中形成了部分非晶相， 经重熔处理后， 非晶相发生完全晶化。
The WC+Ni base self-fluxing alloy coating was fabricated by plasma spraying and then re-melted in furnace. The results show that, after being re-melted, th e coating's morphology changes from laminar structure containing some pores and un-melted particles to dense crystal structure, and the adhesion between coatin g and substrate transforms from mechanical combination to chemico-metallurgical r eaction combination, so the coating's cohesive strength and adhesive strength ar e improved remarkably. The re-melted coating consists of γ-Ni, Ni-B(Ni 2B), Cr-B( CrB), Ni-Si(Ni5Si2) and WC phases that are alike the one of plasma sprayed coating. A little amorphous phase lies in the plasma sprayed coating due to the rapid sol idification process, and the amorphous crystallizes after re-melting process.
参考文献
| [1] | 揭晓华;毛志远 .Ni-Cr-B-Si等离 子喷涂层加热重熔后的组织与性能[J].金属热处理,1996,8:15-17. |
| [2] | 陈荣仙.喷焊（涂）层厚度及其后处理与组织性能关系的研究[J].材料工程,1994(08):41. |
| [3] | 林芃.不同重熔方式对表面涂层显微组织的影响[J].表面工程,1995(01):17. |
| [4] | 邱长军.热喷涂自熔性合金的炉内重熔工艺[J].焊接,1996(12):8. |
| [5] | 毛荣敏 .自熔合金喷涂重熔新工艺-高频重熔技术研究[J].机械工程材料,1992,16(06):40-43. |
| [6] | 李强,王富耻,雷廷权.激光熔覆Ni-Cr-B-Si-C合金的组织及其摩擦磨损特性[J].中国有色金属学报,1998(02):201-205. |
| [7] | 梁工英,李成劳,苏俊义.铝合金激光熔覆处理等离子涂层的显微组织[J].中国有色金属学报,1998(01):28-32. |
| [8] | Heinze M. .Wear resistance of hard coatings in plastics processing[J].Surface & Coatings Technology,1998(1/2):38-44. |
| [9] | 刘英俊;黄建生;刘 亮 et al.粉煤灰微珠填充PVC树脂的挤出加工中螺杆磨损失重的研究[J].塑料,1989(18):29-33. |
| [10] | 赵文轸 .自熔合金覆层工艺研究[J].机械工程材料,1996,20(04):13-22. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%