采用热重分析(TGA)研究了充油SEBS体系的热稳定性,通过分析拉伸强度变化研究了共混体系的耐紫外性能,并用红外光谱(FT-IR)研究了经紫外辐照后体系的化学结构变化.TGA结果表明,白油的加入导致SEBS热稳定性下降,15#、26#和32#白油构成的SEBS(YH-602)填充体系的起始失重温度由纯SEBS的413.8℃分别下降到184.4℃、218.7℃和238.5℃,最大失重速率温度由441.2℃分别下降到436.4℃、434.7℃和436.0℃.充油SEBS的耐紫外性能随白油用量的增加而降低,70phr 15#、26#和32#白油填充SEBS(YH-602)的拉伸强度保留率分别为84.34％、70.07％和97.35％,而190phr的分别为68.55％、65％和77.24％.经紫外辐照后试样表面的FT-IR谱图在3300 cm-1、1720 cm-1和1164 cm-1附近出现吸收峰,显示老化降解后新增基团主要为羧酸类和脂肪族酯类.
参考文献
| [1] | Pratip Sengupta;Jacques W.M.Noordermeer .A comparative study of different techniques for microstructural characterization of oil extended thermoplastic elastomer blends[J].Polymer: The International Journal for the Science and Technology of Polymers,2005(26):12298-12305. |
| [2] | Ayesha Kausar;Sonia Zulfiqar;Saima Shabbir .Mechanical properties of functionalized SEBS based inorganic hybrid materials[J].Polymer bulletin,2007(4):457-468. |
| [3] | Luengo C;Allen NS;Edge M;Wilkinson A;Parellada MD;Barrio JA;Santa VR;Repsol YPF Mostoles 28931 Spain .Photo-oxidative degradation mechanisms in styrene-ethylene-butadiene-styrene (SEBS) triblock copolymer[J].Polymer Degradation and Stability,2006(4):947-956. |
| [4] | White, C.C.;Tan, K.T.;Hunston, D.L.;Nguyen, T.;Benatti, D.J.;Stanley, D.;Chin, J.W. .Laboratory accelerated and natural weathering of styrene-ethylene-butylene- styrene (SEBS) block copolymer[J].Polymer Degradation and Stability,2011(6):1104-1110. |
| [5] | Norman S. Allen;Michele Edge;Despina Mourelatou;Arthur Wilkinson;Christopher M. Liauw;M. Dolores Parellada;Juan A. Barrio;V. Ruiz Santa Quiteria .Influence of ozone on styrene―ethylene―butylene―styrene (SEBS) copolymer[J].Polymer Degradation and Stability,2003(2):297-307. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%