对两种不同铺层形式的平面编织复合材料层合板低速冲击后拉伸性能进行了实验研究,在此基础上建立了有限元损伤扩展仿真模拟.在所建立的有限元模型中,将低速冲击损伤等效为形状规则的软化夹杂,并针对两种铺层形式采用不同的损伤判据和模量衰减准则.研究结果表明:该有限元模拟结果与实验结果符合,说明该模型能够准确地预测低速冲击后平面编织复合材料层合板的损伤扩展规律和剩余拉伸强度;不同铺层形式的平面编织复合材料层合板在低速冲击后拉伸的损伤扩展规律不同;它们的冲击后拉伸强度降均>50%,在复合材料结构设计中应该受到重视.
参考文献
| [1] | 程小全,吴学仁.复合材料层合板低速冲击损伤容限的改进方法和影响因素[J].高分子材料科学与工程,2002,18(3):20-25.Cheng Xiaoquan,Wu Xueren.Methods for improving damage tolerance of composite laminates after low velocity impact and their influence factors[J].Polymer Materials Science and Engineering,2002,18(3):20-25. |
| [2] | Naik N K,Chandra Sekher Y,Meduri Sailendra.Damage in woven-fabric composites subjected to low-velocity impact[J].Composites Science and Technology,2000,60:731-744. |
| [3] | Iannucci L,Dechaene R,Willows M,et al.A failure model for the analysis of thin woven glass composite structures under impact loadin4gs[J].Computers and Structures,2001,79:785-799. |
| [4] | Hosur M V,Adbullah M,Jeelani S.Studies on the lowvelocity impact response of woven hybrid composites[J].Composite Structures,2005,67:253-262. |
| [5] | 程小全,寇长河,郦正能.低速冲击后复合材料层合板的压缩破坏行为[J].复合材料学报,2001,18(1):115-119.Cheng Xiaoquan,Kou Changhe,Li Zhengneng.Compressive failure behavior of composite laminates after low velocity impact[J].Acta Materiae Compositae Sinica,2001,18(1):115-199. |
| [6] | Cheng Xiaoquan,Li Zhengneng.Damage progressive model of compression of composite laminates after low velocity impact[J].Applied Mathematics and Mechanics (English Edition),2005,26(5):618-626. |
| [7] | Sanehea-Saez S,Barbero E,Zaera R,et al.Compression after impact of thin composite laminates[J].Composites Science And Technology,2005,65:1911-1919. |
| [8] | 中国航空研究院编著.复合材料结构设计手册[M].北京:航空工业出版社,2001:615-621.Institute of Chinese Aviation Research.Handbook of Composites Structure Design[M].Beijing:Aviation Industry Press,2001:615-621. |
| [9] | 程小全,张子龙,吴学仁.小尺寸试件层合板低速冲击后的剩余压缩强度[J].复合材料学报,2002,19(6):8-12.Cheng Xiaoquan,Zhang Zilong,Wu Xueren.Post-impact compressive strength of small composite laminate specimens[J].Acta Materiae Compositae Sinica,2002,19(6):8-12. |
| [10] | Cheng Xiaoquan,Al-Mansour All,Li Zhengneng,Kou Changhe.Compression strength of stitched laminates after low velocity impact[J].Journal of Reinforced Plastics and Composites,2005,24(9):935-947. |
| [11] | Hashin Z.Failure criteria for unidirectional fiber composites[J].Journal of Applied Mechanics,1980,47:329-334. |
| [12] | Chang F K,Chang K Y.A progressive failure damage model for laminated composites containing stress concentration[J].Journal of Composites Material,1987,21:809-833. |
| [13] | 程小全,邹健,许延敏.等.含孔平面编织混杂铺层层合板压缩破坏仿真[J].力学学报.2007,39(6):829-834.Cheng Xiaoquan,Zou Jian,Xu Yanmin,et al.Simulation of compressive failure of hybrid plain woven fabric laminate with a hole[J].Chinese Journal of Theoretical and Applied Mechanics,2007,39(6):829-834. |
| [14] | 邹健,程小全,邵世纲,等.基于ANSYS环境的平面编织层合板拉伸破坏数值仿真[J].复合材料学报,2007,24(6):180-184.Zou Jian,Cheng Xiaoquan,Shao Shigang,et al.Numerical simulation for plain woven composite laminate based on ANSYS software[J].Acta Materiae Compoaitae Sinica,2007,24(6):180-184. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%