采用永田进治公式和全浮力模型计算了机械搅拌法和喷吹法的铁水搅拌能，研究了搅拌能和混匀时间的关系，并和水模型的结果进行了比较，分析了两种搅拌能影响混匀时间的原因。结果表明，机械搅拌法的搅拌能力比喷吹法大数倍，在同一搅拌能下机械搅拌方式的混匀时间比喷吹法短。搅拌优势使得机械搅拌法比喷吹法的脱硫率比喷吹法平均高18．61％，带来的副作用是铁水温降要高于喷吹法15℃，以及对耐火材料的侵蚀速度为喷吹法的3倍。
The stirring power of hot metal by mechanical stirring method and magnesium injection method were cal-culated with empirical formula and plume model .The relationship between mixing time and stirring power of hot metal was determined according to the calculated results and compared with that of liquid in water model .The results show that mechanical stirring method stirring power is several times of the injection method stirring power .The me-chanical stirring method mixing time is shorter than that of injection method at the same level of stirring power .The desulfurization rate of hot metal by mechanical stirring method is 18 .61% higher than that by injection method . Meanwhile ,it brings some negative effects which the temperature drop of hot metal caused by mechanical stirring method are 15 ℃ higher than that caused by injection method for strong mixing ,and the refractory erosion rate of mechanical stirring method is 3 times of that of injection method .
参考文献
| [1] | WU Wei,WU Wei,HU Yan-bin,LIU Liu,DING Yong-liang.Physical Simulation of New Desulphurization Technology Using Pulsed and Rotary Stirring-Injection[J].钢铁研究学报（英文版）,2008(01):15-18. |
| [2] | 吴明,李应江.单喷、复喷、KR法脱硫工艺在马钢的实践分析[J].中国冶金,2008(12):9-12,21. |
| [3] | 张茂林,徐安军.KR法与喷吹法在铁水脱硫中应用的比较[J].炼钢,2009(05):73-77. |
| [4] | 欧阳德刚,邹继新,蒋扬虎,朱善合,李明晖,罗巍.改善KR搅拌脱硫混合特性的理论分析与实践[J].武钢技术,2011(05):14-18. |
| [5] | 牟永国,吴明,李海军.单喷和复喷及KR法脱硫工艺分析[J].冶金设备,2010(05):55-58,24. |
| [6] | Kruger M;Kirmse O J;Cavali D.Numerical Analysis of Flow at Kambara Reactor (KR) for Hot Metal Desulphurization[A].,2007:221. |
| [7] | 刘燕,张廷安,朱盼盼,豆志河,蒋孝丽,赫冀成.KR法搅拌模式对固液分散性影响研究[J].过程工程学报,2010(z1):58-62. |
| [8] | Norifumi KOCHI;Koji MORI;Manabu IGUCHI .Comparison of Mixing Time Values between Gas Injections from Centered and Off-centered L-shaped Top Lance in the Presence of Swirl Motion[J].ISIJ International,2012(10):1921-1923. |
| [9] | 张信昭.喷粉冶金基本原理[M].北京:冶金工业出版社,1988:144. |
| [10] | 王凯;虞军.搅拌设备[M].北京:化学工业出版社,2003:60. |
| [11] | 李建军 .镁基脱硫剂铁水预处理的研究[D].辽宁科技大学,2008. |
| [12] | 杨治立,邓能运,张明远,任正德,朱光俊.钢包喂镁线的模拟研究[J].重庆工业高等专科学校学报,2001(01):18-20,76. |
| [13] | 张宏志 .铁水预处理中镁基脱硫剂的混合行为研究[D].东北大学,2009. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%