欢迎登录材料期刊网

材料期刊网

高级检索

研究了一种新型含硼低碳高锰合金并讨论了热处理对其组织的影响。研究表明,合金铸态组织由铁素体基体(少量残留奥氏体)、M2B硼化物、M23(C,B)6以及Ti(C,N)相组成,且硼化物呈断续网状分布;高温淬火后基体并没有发生马氏体相变,基体中残留奥氏体的含量增加,硼化物因部分溶解体积分数减少,且硼化物的分布更加弥散。从热力学角度分析了热处理对合金组织的影响。

A novel low-carbon high-manganese alloy containing boron was developed and effect of heat treatment on microstructure of the steel was discussed.The results indicate that the microstructure of as-cast alloy consists of ferrite matrix(with some residual austenite),M2B boride,M23(C,B)6 and Ti(C,N) phase,and the boride distributes in the form of intermittent network.After high temperature quenching,No martensite transformation is observed in the matrix and the boride volume fraction decreases due to dissolution of partial boride,and it distributes more even.The effect of heat treatment on microstructure of the alloy is analyzed by thermodynamics.

参考文献

[1] Fisher J C .Influence of boron on hardenability of steel[J].Journal of Metals,1954,6(10):1146-1147.
[2] 冶金工业部钢铁研究总院.硼钢研究文集[M].北京:冶金工业出版社,1981
[3] 巴纳吉;(美)莫罗尔;祖荣祥;郭曼玖.钢中的硼[M].北京:冶金工业出版社,1985
[4] 本溪钢铁公司第一炼钢厂硼钢[M].北京:冶金工业出版社,1977
[5] Sen S;Sen U;Bindal C .The growth kinetics of borides formed on boronized AISI 4140 steel[J].Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology,2005(2):195-202.
[6] Lakeland K D;Graham E;Heron A .Mechanical properties and mierostructures of a series of FCB alloys[D].Brisbane (Australia),The University of Queensland,1992.
[7] 刘仲礼,李言祥,陈祥,胡开华.高硼铁基合金在不同铸型中凝固的组织与力学性能[J].金属学报,2007(05):477-481.
[8] 符寒光,蒋志强.耐磨铸造Fe-B-C合金的研究[J].金属学报,2006(05):545-548.
[9] LIU Zhong-li,CHEN Xiang,LI Yan-xiang,HU Kai-hua.High Boron Iron-Based Alloy and Its Modification[J].钢铁研究学报(英文版),2009(03):37-42,54.
[10] H. Fu;Q. Zhou;Z. Jiang .A Study of the Quenching Structures of Fe-B-C Alloy[J].Materialwissenschaft und Werkstofftechnik,2007(4):299-302.
[11] 刘俞铭.金属热处理常见工艺技术五百种与质量缺陷分析防治及最新标准应用、常用参数速查实用手册[M].北京:北方工业大学出版社,2006
[12] 梁英教;车荫昌.无机物热力学手册[M].沈阳:东北大学出版社,1993
[13] 雍岐龙.钢铁材料中的第二相[M].北京:冶金工业出版社,2006:141-181.
[14] Hudd R C;Jones A;Kale M N .A method for calculating the solubility and composition of earbonitride precipitates in steel with particular reference to niobium carbonitride[J].JISI,1971,209:121-125.
[15] 冶金工业部钢铁研究总院.钢和铁、镍基合金的物理化学相分析[M].上海:上海科学技术出版社,1981
[16] 张鸿冰;倪乐民;徐祖耀 .Fe-Mn-C系Ms及马氏体相变驱动力的热力学计算[J].金属学报,1987,23(01):42-49.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%