欢迎登录材料期刊网

材料期刊网

高级检索

在新型近β钛合金TLM(Ti-3Zr2Sn-3Mo-25Nb)表面用溶胶-凝胶法镀上一层TiO2薄膜,再将薄膜依次用羟基化溶液和胺基化溶液处理以在薄膜表面引入活性OH-和NH2-,然后通过该活性官能团将肝素共价键接在薄膜表面.利用XRD、SEM和EDS研究了TiO2薄膜的相结构和表面特性:通过测定材料表面的接触角、溶血率和血小板黏附行为对肝素化TLM合金的血液相容性进行分析、评价.结果表明,表面肝素化处理后TLM合金的血液相容性得到了明显的改善.

A layer of TiO2 film was prepared by sol-gel method on the surface of TLM(Ti-3Zr-2Sn-3Mo-25Nb)alloy.Then the coated samples were treated by hydroxyl solution and amination solution in order to introduce the OH- and NH2-active groups,and the heparin was linked on the surface of TiP2 film through these active groups.The phase identification and the surface characteristics of the samples were successively undertaken using XRD,SEM and EDS.The in vitro blood compatibility of the TLM alloy specimens with and without heparinization treatments was evaluated by the contact angle test,the hemolysis test and investigation of their platelet adhesion behavior.The results showed that the haemocompatibility of the TLM alloy could be significantly improved by surface modification via heparinization.

参考文献

[1] Wise D L.Biomaterials and Bioengineering Handbook[M].New York,USA:Marcel Dekker,Inc,2000:205.
[2] Jing Fengjuan et al.[J].Materials Review,2003,17:187.
[3] Brynda E;Houska M;Jirouskova M;Dyr JE .Albumin and heparin multilayer coatings for blood-contacting medical devices.[J].Journal of biomedical materials research, Part B. Applied biomaterials,2000(2):249-257.
[4] Yang Ping et al.[J].Surface and Coatings Technology,2002,156:284.
[5] Michanetzis G P A et al.[J].BIOMATERIALS,2003,24:677.
[6] Yu Zhentao;Zhou Lian .Influence of martensitic transformation on mechanical compatibility of biomedical beta type titanium alloy TLM[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(0):391-394.
[7] 张明华,于振涛,周廉,张殿忠.β型钛合金材料的生物相容性评价[J].稀有金属材料与工程,2007(10):1815-1819.
[8] 于振涛 et al.[J].稀有金属材料与工程,2006,35:261.
[9] 刘敬肖 et al.[J].中国生物医学工程学杂志,2002,21:398.
[10] Harizanovl O et al.[J].Solar Energy Materials and Solar Cells,2000,63:185.
[11] 徐禄祥,刘艳文,周红芳,冷永祥,黄楠.不同晶体结构氧化钛薄膜性能研究[J].功能材料,2004(z1):2461-2462,2465.
[12] Wang Xianghui et al.[J].Surface and Coatings Technology,2000,36:128.
[13] Huang Nan.[J].Biomaterials,2003(24):2177.
[14] Chen J Y et al.[J].Bhgmaterials,2002,23(02):2545.
[15] Sanchez J et al.[J].Biomedical Materials Research,1997,37(01):37.
[16] Yu JL.;Ljungh A.;Johansson S. .FIBRONECTIN EXPOSES DIFFERENT DOMAINS AFTER ADSORPTION TO A HEPARINIZED AND AN UNHEPARINIZED POLY(VINYL CHLORIDE) SURFACE[J].Biomaterials,1997(5):421-427.
[17] Magnani A;Barbucci R .[J].Biomaterials,1994,12:955.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%