利用套管法制备了Nb-Al七芯前驱体线材,并通过等温热处理的方式分别在700～1500℃对其进行热处理,研究了Nb-Al二元体系在其界面处的反应成相过程.研究发现700℃热处理的样品在其界面处只形成了NbAl3反应层;800～900℃热处理的样品界面处又形成一层Nb:Al≈1:1新反应层;随着热处理温度的增加到1000℃,界面处出现Nb2Al反应层,并随热处理温度的增加Nb2Al反应层的厚度增加;1400℃和1500℃热处理的样品中开始观察到了少量的Nb3Al相,磁性测量表明1400℃和1500℃条件下热处理样品的起始超导转变温度分别为14 K和15.8K,说明套管法制备的Nb-Al前驱体线材在1400℃以上热处理可以获得Nb3Al超导相,但由于Nb3Al相中的Al含量偏离理想化学计量比,导致其超导转变温度偏低.
参考文献
| [1] | Ando T.;Sugimoto M. .Design consideration of the ITER-TF coil with a react-and-wind technique using Nb/sub 3/Al conductor[J].IEEE Transactions on Magnetics,1996(4):2324-2327. |
| [2] | Okuno K;Shikov A;Koizumi N .Superconducting magnet system in a fusion reactor[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2004(0):141-147. |
| [3] | Ayai N.;Mikumo A.;Yamada Y.;Takahashi K.;Sato K.;Koizumi N.;Ando T.;Sugimoto M.;Tsuji H.;Okuno K.;Mitchell N. .Improvement of critical current density and residual resistivity onjelly-roll processed Nb<SUB>3</SUB>Al superconducting wires[J].IEEE Transactions on Applied Superconductivity: A Publication of the IEEE Superconductivity Committee,1997(2):1564-1567. |
| [4] | Takahashi Y.;Sugimoto M. .Experimental results of 40-kA Nb/sub 3/Al cable-in-conduit conductor for fusion machines[J].IEEE Transactions on Magnetics,1994(4):2531-2534. |
| [5] | Takeuchi T. .Nb<SUB>3</SUB>Al superconductors[J].IEEE Transactions on Applied Superconductivity: A Publication of the IEEE Superconductivity Committee,2002(1):1088-1093. |
| [6] | Takeuchi T.;Iijima Y. .Effects of additive elements on continuous ultra-fine Nb/sub 3/Al MF superconductor[J].IEEE Transactions on Magnetics,1989(2):2068-2075. |
| [7] | Iijima Y.;Kikuchi A.;Banno N.;Takeuchi T.;Inoue K. .Direct formation of A15 phase through RHQ treatment in RIT processed Nb/Al-Cu precursor wire[J].IEEE Transactions on Applied Superconductivity: A Publication of the IEEE Superconductivity Committee,2003(2):3410-3413. |
| [8] | Kosuge M.;Iijima Y. .Multifilamentary Nb/sub 3/Al wires reacted at high temperature for short time[J].IEEE Transactions on Applied Superconductivity: A Publication of the IEEE Superconductivity Committee,1993(1):1010-1013. |
| [9] | Peng, LM .Synthesis and mechanical properties of niobium aluminide-based composites[J].Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1-2):232-236. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%