利用电子背散射衍射(EBSD)和X射线衍射(XRD)技术,研究在800℃退火时,不同退火时间对亚稳态奥氏体不锈钢301L织构的影响.结果表明,冷轧退火后,亚稳态奥氏体不锈钢301L织构强度明显减弱,奥氏体相织构主要由Brass{110} <112>,Goss{110} <001>和Copper{112} <111>、{225} <554>组成,并且随着退火时间的增加,Brass织构强度明显降低；同时对再结晶织构的形成机制的讨论认为,亚稳态奥氏体不锈钢301L的再结晶被“定向形核”过程所控制.
参考文献
| [1] | K. Spencer;J.D. Embury;K.T. Conlon .Strengthening via the formation of strain-induced martensite in stainless steels[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(0):873-881. |
| [2] | AMAR K. DE;JOHN G. SPEER;DAVID K. MATLOCK .Deformation-Induced Phase Transformation and Strain Hardening in Type 304 Austenitic Stainless Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2006(6):1875-1886. |
| [3] | JOSHUA A. LICHTENFELD;MARTIN C. MATAYA;CHESTER J. VAN TYNE .Effect of Strain Rate on Stress-Strain Behavior of Alloy 309 and 304L Austenitic Stainless Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2006(1):147-161. |
| [4] | Kumar BR;Mahato B;Bandyopadhyay NR;Bhattacharya DK .Comparison of rolling texture in low and medium stacking fault energy austenitic stainless steels[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):296-301. |
| [5] | B. Ravi Kumar;A.K. Singh;Samar Das;D.K. Bhattacharya .Cold rolling texture in AISI 304 stainless steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):132-139. |
| [6] | Angeline POULON-QUINTIN;Stephanie BROCHET;Jean-Bernard VOGT .Fine Grained Austenitic Stainless Steels: The Role of Strain Induced alpha' Martensite and the Reversion Mechanism Limitations[J].ISIJ International,2009(2):293-301. |
| [7] | Humphreys F J;Hatherly M.Recrystallisation and Related Phenomenon[M].Oxford:Elsevier,1995:109. |
| [8] | Hirsch J;Lucke K .Mechanism of deformation and development of rolling textures in polycrystalline f.c.c.metals-Ⅱ[J].Acta Metallurgica,1988,36(11):2883. |
| [9] | 毛卫民;张新民.晶体材料织构定量分析[M].北京:冶金工业出版社,1995 |
| [10] | Hirsch J;Lucke K .Mechanism of deformation and development of rolling textures in polycrystalline f.c.c.metals-Ⅱ[J].Acta Metallurgica,1988,36(11):2905-2927. |
| [11] | Donadille C;Valle R;Dervin P et al.Development of texture and microstructure during cold-rolling and annealing of FCC alloys:example of an austenitic stainless steel[J].Acta Metallurgica,1989,37(06):1547-1571. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%