采用XRD、SEM和激光粒度仪等手段,观察并研究了不同特性氧化镁在硅钢表面形成硅酸镁底层形貌特点,并结合热力学和差热-失重分析了MgO-SiO2的反应机理。研究结果表明：粒度小,活性值高的特种氧化镁在高温退火过程中与基体表面氧化物生成的硅酸镁底层,界面中硅酸镁底层嵌入基体较多,表面致密,颗粒细小,有利于形成附着性能优良的硅酸镁底层。
Surface microstructure of Mg2SiO4 coatings formed on the surface of oriented silicon steel coated with different kinds of MgO was investigated by XRD and SEM.The reaction mechanism between MgO and SiO2 was analyzed by TG-DSC and thermodynamic calculation.Results revealed that when the MgO with finer microstructure size and higher activity is employed,a dense Mg2SiO4 layer with finer microstructure and good binding to the steel substrate can be obtained.The results are very helpful for the preparation of oriented silicon steel.
参考文献
| [1] | 胡守天,孔祥华,李平和,赵启博,杨皓,王向欣,何业东.取向硅钢绝缘涂层结构及其对铁芯损耗的影响[J].北京科技大学学报,2009(10):1277-1280. |
| [2] | 田口悟 .电工钢板[J].硅钢技术,1981,8:66-76. |
| [3] | 胡守天,孔祥华,王向欣,赵启博,李平和,杨皓,何业东.高磁感取向硅钢表面处理对铁芯损耗的影响[J].材料热处理学报,2010(04):137-140. |
| [4] | 何忠治.电工钢[M].北京:冶金工业出版社,1996 |
| [5] | 叶大伦;胡建华.实用无机物热力学数据手册[M].北京:冶金工业出版社,2002 |
| [6] | Knaclee O;Kubaschewski O;Hesselmann K.Thermochemical Properties of Inorganic Substance[M].Beilin:Springer-Verlag,1991 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%