介绍了镁合金表面热喷涂技术的特点及国内外采用热喷涂技术为镁合金表面提供A1涂层防护的研究现状,指出了镁合金表面热喷涂技术获得Al涂层在防护中存在的不足,从喷涂工艺和喷涂材料的角度分析了镁合金表面热喷涂Al涂层技术的发展趋势,并提出了今后镁合金表面热喷涂Al涂层防护工作需要解决的两个主要问题:降低热喷涂Al涂层的孔隙率和从材料本身提高A1涂层的耐磨防腐性能.
参考文献
| [1] | Gray J E;Luan B .Protective coatings on magnesium and its alloys:A critical review[J].Journal of Alloys and Compounds,2002,336(1-2):88. |
| [2] | ZHAO Hui,WANG Xiao-hui,LIU Qiu-lei,CHEN Li-jia,LIU Zheng.Structure and wear resistance of TiN and TiAlN coatings on AZ91 alloy deposited by multi-arc ion plating[J].中国有色金属学报（英文版）,2010(z2):679-682. |
| [3] | 徐滨士;朱绍华.表面工程的理论与技术[M].北京:国防工业出版社,2010:117. |
| [4] | Serita K .Typical problems related to conversion treatment on magnesium alloys[J].Hyomen Gijutsu,2002,53(03):176. |
| [5] | 芦笙,付丽,陈静.镁合金热喷涂研究进展[J].江苏科技大学学报（自然科学版）,2010(03):249-254. |
| [6] | 韦春贝,张春霞,田修波,杨士勤,Ricky Fu,Paul K.Chu.镁合金表面耐蚀改性技术[J].轻合金加工技术,2004(06):6-11. |
| [7] | 王海军.热喷涂实用技术[M].北京:国防工业出版社,2006 |
| [8] | Pardo A;Casajús P;Mohedano M et al.Corrosion protection of Mg/A1 alloys by thermal sprayed aluminium coatings[J].Applied Surface Science,2009,255(15):6968. |
| [9] | Pardo A;Merino MC;Mohedano M;Casajus P;Coy AE;Arrabal R .Corrosion behaviour of Mg/Al alloys with composite coatings[J].Surface & Coatings Technology,2009(9):1252-1263. |
| [10] | Carboneras M;López M D;Rodrigo P et al.Corros behaviour of thermally sprayed A1 and Al/SiCp composite coatings on ZE41 magnesium alloy in chloride medium[J].Corrosion Science,2010,52(03):761. |
| [11] | Campo, M;Carboneras, M;Lopez, MD;Torres, B;Rodrigo, P;Otero, E;Rams, J .Corrosion resistance of thermally sprayed Al and Al/SiC coatings on Mg[J].Surface & Coatings Technology,2009(20/21):3224-3230. |
| [12] | 张津,王莹,欧信兵,孙智富.镁合金喷铝封闭涂层耐蚀性能研究[J].武汉理工大学学报,2009(17):30-33. |
| [13] | 张忠明,冯亚如,徐春杰.等离子喷涂Al65CU23Fe12涂层的组织与性能研究[J].兵器材料科学与工程,2008(01):23-26. |
| [14] | 宫文彪,李于朋,马凯,孙大千.镁合金等离子喷涂Al/Al_2O_3涂层的耐腐蚀性能[J].材料热处理学报,2009(06):164-168. |
| [15] | 梁秀兵,徐滨士.先进的冷喷涂技术[J].中国设备工程,2001(12):19-21. |
| [16] | 卜恒勇,卢晨.镁合金表面冷喷涂铝涂层的热处理研究[J].金属功能材料,2011(04):26-31. |
| [17] | 袁晓光,刘彦学,王怡嵩,黄宏军.镁合金表面冷喷涂铝合金的界面扩散行为[J].焊接学报,2007(11):9-12,16. |
| [18] | Chiu Liuho;Lin Hsingan;Chen Chunchin et al.Effect of aluminum coating on corrosion properties of AZ31 magnesium alloy[J].Materials Science Forum,2003,419-422(02):909. |
| [19] | Chiu Liuho;Chen Chunchin;Yang Chihfu .Improvement of corrosion properties in an aluminum-sprayed AZ31 magnesium alloy by a post-hot pressing and anodizing treatment[J].Surface and Coatings Technology,2005,191(2-3):181. |
| [20] | 梁永政,郝远,杨贵荣,李元东.镁合金AZ91D表面电弧喷涂铝工艺的研究[J].机械工程材料,2005(03):29-31. |
| [21] | 黄笑梅 .镁合金表面电弧喷涂铝工艺及涂层性能的研究[D].合肥工业大学,2008. |
| [22] | 贺定勇,耿丹丹,蒋建敏.镁合金表面电弧喷涂铝涂层在氯离子中的腐蚀行为[J].焊接,2007(03):24-28. |
| [23] | 曲明,刘忆.AZ91D镁合金表面电弧喷涂铝锌涂层组织的研究[J].表面技术,2006(06):17-18. |
| [24] | 张津,麻彦龙,黄福祥,肖锋.镁合金表面铝涂层研究新进展[J].表面技术,2007(05):64-67. |
| [25] | 王宾,叶宏,闫忠琳,邓代玉.镁合金表面铝涂层研究进展[J].表面技术,2010(01):85-88. |
| [26] | Zhang Zhibin;Liang Xiubing;Chen Yongxiong et al.Preparation and hardness behavior of Al-based amorphous/nancrystalline composite coatings on Mg alloy prepared by high velocity arc spraying process[J].Materials Science Forum,2011,694(01):256. |
| [27] | Newbery AP;Grant PS;Neiser RA .The velocity and temperature of steel droplets during electric arc spraying[J].Surface & Coatings Technology,2005(1):91-101. |
| [28] | Cheng Jiangbo;Liang Xiubing;Xu Binshi et al.Formation and properties of Fe-based amorphous/nanocrystalline alloy coating prepared by wire arc spraying process[J].J NonCrvst Solids,2009,355(34-36):1673. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%