通过水淬＋空冷复合的方式，实现了在一个试样上淬火的冷却速度从水淬到空冷的不同，进而研究了冷却速度对TC2钛合金板材β淬火组织的影响。结果表明，β淬火时冷却速度不同，使得淬火后合金的金相组织存在较大的差别，进而对成品板材的组织产生影响。 TC2合金板在热轧过程中获得了球状-纤维状的混合显微组织，水淬＋空冷复合试样的水淬部分均发生马氏体转变，但转变的进程有所不同，水淬＋空冷复合试样的空冷部分均为片状组织，随着冷却速度的降低，α片丛明显长大，α片宽度变大。淬火的延迟会导致板材显微组织不均匀。
The effects of cooling rates on microstructure of TC 2 titanium alloy plate quenched above the β-transus tem-perature were studied in this paper .The results show that the different microstructures and properties are generated by cooling rates and it will finally affects the microstructure of finished products .TA2 titanium alloy plate gains spherical and fibrous microstructure after hot rolling .Rapid quenching leads to a martensitic transformation but the transforma-tion progress are various .Slow cooling from the βphase field resulted in pure lamellar microstructures , and the αla-mellar become coarser with reduced cooling rates .So the delay of quenching caused the inhomogeneous of microstruc-ture of TC2 titanium alloy plate .
参考文献
| [1] | 曹春晓.航空用钛合金的发展概况[J].航空科学技术,2005(4):3-6. |
| [2] | 赵永庆,奚正平,曲恒磊.我国航空用钛合金材料研究现状[J].航空材料学报,2003(z1):215-219. |
| [3] | 黄张洪,曲恒磊,邓超,杨建朝.航空用钛及钛合金的发展及应用[J].材料导报,2011(01):102-107. |
| [4] | 辛社伟,赵永庆.钛合金固态相变的归纳与讨论（Ⅳ）--钛合金热处理的归类[J].钛工业进展,2009(03):26-29. |
| [5] | 张慧儒.两相钛合金热加工组织与织构演变的研究进展[J].广州化工,2011(04):36-37,54. |
| [6] | 沙爱学,李兴无,曾卫东,张驰.钛合金β区加热保温时间的研究[J].航空材料学报,2010(04):8-11. |
| [7] | Lütjering G .Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys[J].Materi-als Science and Engineering:A,1998,243(1/2):32-45. |
| [8] | 常辉,周廉,张廷杰.钛合金固态相变的研究进展[J].稀有金属材料与工程,2007(09):1505-1510. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%