A hotrolled steel with high yield strength of 700 MPa, good elongation of about 20% and low ductilebrittle transition temperature (DBTT) lower than -70 ℃ has been developed in laboratory. The results show that adopting finishing rolling temperature of around 800 ℃ is rational, and coiling temperature is between 400 and 500 ℃. The strength of developed 700 MPa hotrolled high strength steel is derived from the cumulative contribution of fine grain size, dislocation hardening and precipitation hardening. The fine grain strengthening and precipitation hardening are the dominant factors responsible for such high strength, and good elongation and toughness are predominantly due to fine grain ferrite.
参考文献
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%