欢迎登录材料期刊网

材料期刊网

高级检索

采用等温DSC法研究了E-51环氧树脂与4,4’-二氨基二苯基砜(DDS)体系的固化反应过程,并与已有固化模型拟合得到了170、180、190、200℃下的等温固化反应动力学的参数,根据决定系数R2确定了适合的固化模型。研究表明:当固化度小于40%时属于Kamal自催化模型;当固化度大于40%时属于n级固化模型,即固化反应由Kamal自催化反应向n级反应转变。

The cure reaction kinetics of E-51 epoxy resin and 4,4'-diaminodiphenylsulfone(DDS) system was investigated by the isothermal DSC method,and isothermal curing kinetics parameters at 170,180,190,200℃ were obtained through fitting between the experimental data and the curing model.According to the values of coefficient of determination(R2) of the fitted data,a suitable curing reaction kinetic model was determined.The reaction process shows to be dominated by different mechanism at different stages of the E-51/DDS system curing process,when the cure degree is less than 40%,the curing system is Kamal autocatalytic reaction model;when the cure degree is more than 40%,the curing system is nth order reation model,with an initial autocatalytic reaction shifting into an nth order reaction as the reaction proceeding.

参考文献

[1] 王德中.环氧树脂的生产与应用[M].北京:化学工业出版社,2001:3-7.
[2] 苏祖君.曾金芳,王华强.中温固化环氧树脂基体研究进展[J].玻璃钢/复合材料,2004(4):50-53.
[3] 张明,安学锋,唐邦铭,等.高性能双组份环氧树脂固化动力学研究和TTT图绘制[J].复合材料学报,2006,23(1):17-25.
[4] 曾秀妮,段跃新.840S环氧树脂体系固化反应特性[J].复合材料学报,2007,24(3):100-104.
[5] Goodwin A A. The curing kinetics of a modified bismaleimide [J]. Polymer International, 1993, 32(1): 87-92.
[6] Atarsia A, Boukhili R. Relationship between isothermal and dynamic cure of thermosets via the isoconversion representation [J]. Polymer Engineering and Science, 2000, 40(3) : 607-620.
[7] 赵卫娟,张佐光,孙志杰,等.非等温法研究TGDDM/DDS体系固化反应动力学[J].高分子学报,2006(4):564-568.
[8] 代晓青,肖加余,曾竟成.等温DSC法研究RFI用环氧树脂固化动力学[J].复合材料学报,2008,25(4):19-23.
[9] ChanchiraJubsilp, Kanokwan Punson, Tsutomu Takeichi. Curing kinetics of benzoxazine-epoxy copolymer investigated by non- isothermal differential scanning calorimetry [J]. Polymer Degradation and Stability, 2010, 95(6): 918-924.
[10] Boey Freddy Y C, Song X L, Yue C Y, et al. Modeling the curing kinetics for a modified bismaleimide resin [J]. Journal of Polymer Science Part A: Polymer Chemistry, 2000, 38(5) : 907-913.
[11] 张竞,黄培.环氧树脂固化动力学研究进展[J].材料导报,2009,23(7):58-61.
[12] 郭战胜,杜善义,张博明,等.先进复合材料用环氧树脂的固化反应和化学流变[J].复合材料学报,2004,21(4):146-151.
[13] Lee J Y, Choi H K, Shim M J, et al. Kinetic studies of an epoxy cure reaction by isothermal DSC analysis [J]. Thermochimica Acta, 2000, 343(2000) : 111-117.
[14] 陈平,王德忠.环氧树脂及其应用[M].北京:化学工业出版社,2004:52-61.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%