采用3种钎焊工艺焊接泡沫铝进行对比实验,焊接工艺包括:在高真空(真空度为10-3 Pa)条件下采用复合层钎料进行钎焊;在低真空(真空度为1 Pa)条件下采用复合层钎料进行钎焊;在高真空(真空度为10-3 Pa)条件下采用单层钎料进行钎焊.对焊接接头的宏观、微观特性与抗弯强度进行分析比较.结果表明:在高真空条件下采用复合层钎料进行钎焊可获得满意的接头,接头强度明显高于母材;在低真空条件下采用复合层钎料进行钎焊所得到的接头强度明显低子母材;在高真空条件下采用单层钎料进行钎焊所得到的接头强度略低于母材.
参考文献
| [1] | Hasan M A;Kim A;Lee H J .[J].Computers & Structures,2008,83:180. |
| [2] | Yu H J;Yao G C;Wang X L et al.[J].Transactions of Nonferrous Metals Society of China,2007,17:93. |
| [3] | Ashby M F;Lu T J .[J].Science in China,2003,46(06):521. |
| [4] | Ashby M F;Evans A;Fleck N A.Metals Foams A Design Guide[M].Boston:Butterworth Heinemann,2000:3. |
| [5] | Haferkamp H;Ostendorf A;Goede M.Cellular Metals and Metal Foaming Technology[M].Bremen:Verlag MIT Publishing,2001:479. |
| [6] | Pogibenko A G;Konkevich V Y;Arbuzova L A .[J].Welt Int,2001,80:312. |
| [7] | Matthes K J;Lang H.Cellular Metals and Metal Foaming Technology[M].Bremen:Verlag MIT Publishing,2001:501. |
| [8] | Wang H;He D P;Chu X M et al.[J].Transactions of the China Welding Institution,2008,29(10):1. |
| [9] | Born C;Kuchert H;Wagner G .[J].Advances in Engineering Materials,2003,5(11):121. |
| [10] | Kizazono K;Kitajia A;Sato E .[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2002,A327:128. |
| [11] | Zhang M J;Li J D;Guo Q E.[J].Light Metals,2006(02):48. |
| [12] | 周万盛;姚君山.铝及铝合金的焊接[M].北京:机械工业出版社,2006:385. |
| [13] | Yu Q C;Yang B;Ma W H et al.[J].Journal of Vacuum Science and Technology,2009,29:68. |
| [14] | Wang H;He S Y;Chu X M .[J].Acta Metallurgica Sinica,2009,45(06):723. |
| [15] | Yu H J;Yao G C;Liu Y H .[J].Transactions of Nonferrous Metals Society of China,2006,16:1335. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%