欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料导报
  4. 累积复合轧制法制备层状超细晶材料的研究现状

材料导报, 2011, 25(9): 6-27.

累积复合轧制法制备层状超细晶材料的研究现状

黄光杰 1, , 邹彬 2, , 黄鑫 3, , 陈泽军 4, , 刘庆 5,

1.重庆大学材料科学与工程学院,重庆,400045;国家镁合金材料工程技术中心,重庆,400044

2.重庆大学材料科学与工程学院,重庆,400045

3.重庆大学材料科学与工程学院,重庆,400045

4.重庆大学材料科学与工程学院,重庆,400045

5.重庆大学材料科学与工程学院,重庆,400045

基金项目:   国家自然科学基金(50890172)  

关键词： 累积复合轧制 , 层状材料 , 超细晶 , 性能 , 织构演变

The Current Research on Manufacturing Ultra-fine Grain Materials by Accumulative Roll Bonding

综述了累积复合轧制(ARB)的工艺原理及累积复合轧制材料晶粒的细化机理、力学性能、组织与织构演变特征,分析了目前研究中存在的问题,指出累积复合轧制是制备大块体超细晶金属材料最有效的强烈塑性加工工艺.

参考文献

[1] Kim Y S;Kang S H;Shin D H .Effect of rolling direction on the microstructure and mechanical properties of accumulative roll bonding(ARB) processed commercially pure 1050aluminum alloy[J].Materials Science Forum,2006,503-504:681.
[2] Tang W N;Chen R S;Han E H .Superplastic behaviors of a Mg-Zn-Y-Zr alloy processed by extrusion and equal channel angular extrusion[J].Journal of Alloys and Compounds,2009,477(1-2):636.
[3] Shogo Komura;Patrick B. Berbon;Minoru Furukawa;Zenji Horita;Minoru Nemoto;Terence G. Langdon .High strain rate superplasticity in an Al-Mg alloy containing scandium[J].Scripta materialia,1998(12):1851-1856.
[4] Terence G. Langdon;Minoru Furukawa;Zenji Horita;Minoru Nemoto .Using intense plastic straining for high-strain-rate superplasticity[J].JOM,1998(6):41-45.
[5] Pirgazi H;Akbarzadeha A;Petrov R et al.Microstructure evolution and mechanical properties of AA1100 aluminum sheet processed by accumulative roll bonding[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2008,497(1-2):132.
[6] Saito Y.;Tsuji N.;Sakai T.;Utsunomiya H. .Novel ultra-high straining process for bulk materials - Development of the accumulative roll-bonding (ARB) process[J].Acta materialia,1999(2):579-583.
[7] 魏伟,陈光.强烈塑性变形方法及其块体超细晶材料[J].有色金属,2008(03):48-52.
[8] Y. Saito;N. Tsuji;H. Utsunomiya;T. Sakai;R. G. Hong .Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process[J].Scripta materialia,1998(9):1221-1227.
[9] Sandip Ghosh Chowdhury;Srivastava V C;Ravikumar B et al.Evolution of texture during accumulative roll bonding(ARB) and its comparison with normal cold rolled aluminum-manganese alloy[J].Scripta Materialia,2006,54(09):1691.
[10] Min Guanghui;Lee Jung-Moo;Kang Suk-Bong et al.Evolution of microstructure for muhilayered A1/ Ni composites by accumulative roll bonding process[J].Materials Letters,2006,60(27):3255.
[11] 张兵,袁守谦,吕爽,张西峰,王超.ARB工艺对1060工业纯铝组织和性能的影响[J].稀有金属,2008(02):135-139.
[12] Saito Y.;Tsuji N.;Sakai T.;Utsunomiya H. .Novel ultra-high straining process for bulk materials - Development of the accumulative roll-bonding (ARB) process[J].Acta materialia,1999(2):579-583.
[13] M. Eizadjou;H. Danesh Manesh;K. Janghorban .Investigation of roll bonding between aluminum alloy strips[J].Materials & design,2008(4):909-913.
[14] H. Danesh Manesh;A. Mashreghi;S. Ehtemam Haghighi;A. Khajeh .Investigation Of Cold Pressure Welding Of Aluminum Powder To Internal Surface Of Aluminum Tube[J].Materials & design,2009(3):723-726.
[15] Tsuji N.;Toyoda T.;Minamino Y.;Koizumi Y.;Yamane T.;Komatsu M. Kiritani M. .Microstructural change of ultrafine-grained aluminum during high-speed plastic deformation[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):108-116.
[16] N.Tsuji;Y.Saito;H.Utsunomiya;S.Tanigawa .ULTRA-FINE GRAINED BULK STEEL PRODUCED BY ACCUMULATIVE ROLL-BONDING(ARB)PROCESS[J].Scripta materialia,1999(7):795-800.
[17] Kyung-Tae Park;Hyuk-Joo Kwon;Woo-Jin Kim et al.Microstructural characteristics and thermal stability of uhrafine grained 6061 A1 alloy fabricated by accumulative roll bonding process[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2001,316(1-2):145.
[18] S. H. Lee;Y. Saito;N. Tsuji .Role of shear strain in ultragrain refinement by accumulative roll-bonding (ARB) process[J].Scripta materialia,2002(4):281-285.
[19] Kolahia A;Akbarzadeh;Barnett M R .Electron hack scattered diffraction(EBSD)characterization of warm rolled and accumulative roll bonding(ARB) processed ferrite[J].Journal of Materials Processing Technology,2009,209(03):1436.
[20] Chowdhury SG;Srivastava VC;Ravikumar B;Soren S .Evolution of texture during accumulative roll bonding (ARB) and its comparison with normal cold rolled aluminium-manganese alloy[J].Scripta materialia,2006(9):1691-1696.
[21] Pirgazi H;Akbarzadeh A;Petrov R;Sidor J;Kestens L .Texture evolution of AA3003 aluminum alloy sheet produced by accumulative roll bonding[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):110-117.
[22] 詹美燕,李元元,陈维平.累积叠轧技术的研究现状与展望[J].中国有色金属学报,2007(06):841-851.
[23] Malin A S;Hatherly M .Microstruture of cold-rolled copper[J].Metal Science,1979,13(08):463.
[24] R. Z. VALIEV;YU. V. IVANISENKO;E. F. RAUCH .STRUCTURE AND DEFORMATON BEHAVIOUR OF ARMCO IRON SUBJECTED TO SEVERE PLASTIC DEFORMATION[J].Acta materialia,1996(12):4705-4712.
[25] Tsuji N;ho Y;Saito Y et al.Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing[J].Scripta Materialia,2002,47(12):893.
[26] Eizadjou M;Kazemi Talachi A;Danesh Manesh H et al.Investigation of structure and mechanical properties of multilayered A1/Cu composite produced by accumulative roll bonding(ARB) process[J].Computer Science and Technology,2008,68(09):2003.
[27] Y. M. Wang;E. Ma .Three strategies to achieve uniform tensile deformation in a nanostructured metal[J].Acta materialia,2004(6):1699-1709.
[28] ZHAN Mei-yan,LI Yuan-yuan,CHEN Wei-ping.Improving mechanical properties of Mg-Al-Zn alloy sheets through accumulative roll-bonding[J].中国有色金属学会会刊（英文版）,2008(02):309-314.
[29] Wu K;Chang H;Maawad E et al.Microstructure and mechanical properties of the Mg/Al laminated composite fabricated by accumulative roll bonding(ARB)[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2010,527(13-14):3073.
[30] H.-W. Kim;S.-B. Kang;N. Tsuji .Elongation increase in ultra-fine grained Al-Fe-Si alloy sheets[J].Acta materialia,2005(6):1737-1749.
[31] M.Z. Quadir;O. Al-Buhamad;L. Bassman .Development of a recovered/recrystallized multilayered micro structure in Al alloys by accumulative roll bonding[J].Acta materialia,2007(16):5438-5448.
[32] Tsuji N;Saito Y;Lee S H et al.ARB(Accumulative rollbonding) and other new techniques to produce bulk ultrafine grained materials[J].Advances in Engineering Materials,2003,5(05):338.
[33] Huang X.;Tsuji N.;Hansen N.;Minamino Y. .Microstructural evolution during accumulative roll-bonding of commercial purity aluminum[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):265-271.
[34] Min G H;Lee J M;Kang S B et al.Evolution of microstructure for multilayered Al/Ni composites by accumulative roll bonding process[J].Materials Letters,2006,60(27):3255.
[35] Abbasi M;Karimi Taheri A et al.Growth rate of intermetallic compounds in Al/Cu bimetal produced by cold roll welding process[J].Journal of Alloys and Compounds,2001,319(1-2):233.
[36] 杨平.电子背散射衍射技术及其应用[M].北京:冶金工业出版社,2007:65.
[37] Costa A L M;Reis A C C;Kestens L et al.Ultra grain refinement and hardening of IF-steel during accumulative rollbonding[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2005,406(1-2):279.
[38] M.Z. Quadir;M. Ferry;O. Al-Buhamad .Shear banding and recrystallization texture development in a multilayered Al alloy sheet produced by accumulative roll bonding[J].Acta materialia,2009(1):29-40.
[39] P. WAGNER;O. ENGLER;K. LUECKE .FORMATION OF Cu-TYPE SHEAR BANDS AND THEIR INFLUENCE ON DEFORMATION AND TEXTURE OF ROLLED f.c.c. {112} < 111 > SINGLE CRYSTALS[J].Acta Metallurgica et Materialia,1995(10):3799-3812.
[40] Kocks U F;Chandra H .Slip geometry in partially constrained deformation[J].Acta Metallurgica,1982,30(03):695.
[41] Shen K;Duggan BJ .Microbands and crystal orientation metastability in cold rolled interstitial-free steel[J].Acta materialia,2007(4):1137-1144.
[42] Humphreys F J;Hatherly M.Recrystallization ＆ related annealing phenomena[M].Oxford,2004:101.
[43] Koizumi M.;Kohara S. .Rolling Textures in Al-Mg Alloys[J].Zeitschrift fur Metallkunde,2000(1):88-96.
[44] Cepeda-Jiménez C M;Pozuelo M;Ruano O A et al.Influence of the thermo mechanical processing on the fracture mechanisms of high strength aluminum/pure aluminum multilayer laminate materials[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2008,490(1-2):319.
[45] Niranjani V L;Hari Kumar K C;Subramanya Sarma V .Development of high strength Al-Mg-Si AA6061 alloy through cold rolling and ageing[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2009,515(1-2):169.
[46] Hyoung Wook Kim;Suk Bong Kang;Nobuhiro Tsuji .Deformation Textures of AA8011 Aluminum Alloy Sheets Severely Deformed by Accumulative Roll Bonding[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2005(11):3151-3163.
[47] Lim S C V;Rollett A D .Length scale effects on recrystallization and texture evolution in Cu layers of a roll-bonded CuNb composite[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2009,520(1-2):189.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net