研究了以柠檬酸钠为配位剂的硫酸盐体系中影响镍铜合金镀层成分的因素.镀液基本组成及工艺条件为:六水合硫酸镍100 g/L,五水合硫酸铜10g/L,柠檬酸钠70g/L,硼酸30g,氯化钠6g/L,温度55℃C,pH 4.5,电流密度3A/dm2.结果表明:镀层中铜含量随主盐硫酸铜和配位剂柠檬酸钠含量的增大而增加,随电流密度和pH的增大而减少.单独加入丁炔二醇或糖精,可使镀层中铜含量升高,加入明胶则镀层铜含量下降.
参考文献
| [1] | S. K. Ghosh;A. K. Grover;G. K. Dey;M. K. Totlani .Nanocrystalline Ni-Cu alloy plating by pulse electrolysis[J].Surface & Coatings Technology,2000(1):48-63. |
| [2] | S.K. Ghosh;G.K. Dey;R.O. Dusane .Improved pitting corrosion behaviour of electrodeposited nanocrystalline Ni-Cu alloys in 3.0 wt. percent NaCl solution[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2006(1/2):235-243. |
| [3] | LEE A Y;FALKE W L;SCHWANEKE A E .Electroplating with Ni-Cu alloy[P].US,4167459,1979-09-11. |
| [4] | BASKARAN I;SANKARA NARAYANAN T S N;STEPHEN A .Pulsed electrodeposition of nanocrystalline Cu-Ni alloy films and evaluation of their charateristic properties[J].Materials Letters,2006,60(16):1990-1995. |
| [5] | Mursel Alper;Hakan Kockar;Murside Safak .Comparison of Ni-Cu alloy films electrodeposited at low and high pH levels[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2008(1/2):15-19. |
| [6] | BONH(O)TE CH;LANDOLT D .Microstructure of Ni-Cu multilayers electrodeposited from a citrate electrolyte[J].Electrochimica Acta,1997,42(1 5):2407-2417. |
| [7] | 吴岩青;郭润秀 .络合滴定法连续测定钨镍铜合金中的镍和铜[J].理化检验-化学分册,1998,34(1 1):494-495. |
| [8] | 方景礼.多元络合物电镀[M].北京:国防工业出版社,1983 |
| [9] | 黄子勋;吴纯素.电镀理论[M].北京:中国农业机械出版社,1982 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%