采用无接触式电涡流位移传感系统,对复合材料真空辅助成型过程中的厚度变化进行了实时监测.研究了在其他条件相同情况下,树脂粘度、充模距离、铺层厚度、铺覆导流网等对厚度稳定需要的最短抽真空时间的影响.结果表明,树脂注满并关闭树脂管以后,持续抽真空可有效提高真空辅助工艺成型纤维体积含量,且有利于减小沿树脂流动方向的厚度梯度;树脂粘度对厚度稳定所需要的最短抽真空时间影响最为明显,粘度越高需抽真空时间越长,充模距离、铺层厚度以及导流网对需要最短的抽真空时间影响相对较小.
参考文献
| [1] | 赵渠森,赵攀峰.真空辅助成型工艺（VARI）研究[J].纤维复合材料,2002(01):42-46. |
| [2] | W. D. Brouwer;E. C. F. C. van Herpt;M. Labordus .Vacuum injection moulding for large structural applications[J].Composites, Part A. Applied science and manufacturing,2003(6):551-558. |
| [3] | 潘利剑,刘卫平,陈萍,戚方方.缝合泡沫夹层复合材料的滚筒剥离性能[J].玻璃钢/复合材料,2013(03):39-42. |
| [4] | J. Timms;S. Bickerton;P.A. Kelly .Laminate thickness and resin pressure evolution during axisymmetric liquid composite moulding with flexible tooling[J].Composites, Part A. Applied science and manufacturing,2012(4):621-630. |
| [5] | Bekir Yenilmez;Murat Senan;E. Murat Sozer .Variation of part thickness and compaction pressure in vacuum infusion process[J].Composites science and technology,2009(11/12):1764-1771. |
| [6] | 刘强,赵龙,曹正华.VARI工艺成型纤维增强树脂复合材料层合板厚度和纤维体积分数的影响因素[J].复合材料学报,2013(06):90-95. |
| [7] | 薛道顺,胡红.真空辅助成型工艺中亚麻纤维增强体树脂流动性能的研究[J].玻璃钢/复合材料,2011(02):15-18,7. |
| [8] | 牟书香,贾智源.碳纤维增强环氧树脂复合材料的液体成型及其性能研究[J].玻璃钢/复合材料,2013(06):16-20. |
| [9] | 潘利剑,刘卫平,陈萍,戚方方.真空辅助成型工艺中预成型体的厚度变化与过流控制[J].复合材料学报,2012(05):244-248. |
| [10] | 杨金水,肖加余,曾竞成,彭超义.真空导入模塑工艺树脂流动行为研究进展[J].宇航材料工艺,2010(01):5-8. |
| [11] | Bekir Yenilmez;E. Murat Sozer .Compaction of e-glass fabric preforms in the Vacuum Infusion Process, A: Characterization experiments[J].Composites, Part A. Applied science and manufacturing,2009(4):499-510. |
| [12] | Thomas Gereke;Oliver Dobrich;Matthias Hubner .Experimental and computational composite textile reinforcement forming: A review[J].Composites, Part A. Applied science and manufacturing,2013(3):1-10. |
| [13] | C. D. Williams;S. M. Grove;J. Summerscales .The compression response of fibre-reinforced plastic plates during manufacture by the resin infusion under flexible tooling method[J].Composites, Part A. Applied science and manufacturing,1998(1/2):111-114. |
| [14] | Q, Govignon;S. Bickerton;PA Kelly .Simulation of the reinforcement compaction and resin flow during the complete resin infusion process[J].Composites, Part A. Applied science and manufacturing,2010(1):45-57. |
| [15] | 陈鹏,段跃新,梁志勇.预成型体纵向渗透率统计模型[J].复合材料学报,2004(02):105-110. |
| [16] | 杨金水,肖加余,曾竟成,彭超义,杨孚标,冯学斌.真空导入模塑工艺中织物预成型体的可压缩性[J].复合材料学报,2011(06):1-7. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%