采用SEM和AFM对不同合金化工艺的热镀锌合金化镀层断面结构和表面形貌进行观察和表征,并用摩擦系数仪测定了压力对不同工艺的镀层表面摩擦系数的影响,分析了合金化工艺和载荷对热镀锌合金化钢板(简称GA钢板)镀层表面摩擦特性的影响.结果表明,合金化时间为50 s时镀层表面的摩擦系数最大,此后随着合金化时间的延长镀层表面的摩擦系数基本保持不变;不同工艺的合金化镀层表面的相结构不同,当镀层表面以ζ相为主并伴有少量η相或以块状ζ相及致密的栅柱状δ相晶体为主时,镀层表面较平滑,表面没有出现明显的"火山口"状形貌时镀层表面的摩擦系数最小;随压应力的增加,镀层表面摩擦系数逐步增大,但是在较大压应力作用下,镀层表面摩擦系数的增幅明显降低.
参考文献
| [1] | 张启富;刘邦津;黄建中.现代钢带连续热镀锌[M].北京:冶金工业出版社,2007 |
| [2] | Sohei lWAMOTO;Shojiro OCHIAI;Hiroshi OKUDA .Analysis of Group-buckling and -debonding Behaviors of Galvannealed Coating Layer on Steel Substrates under Applied Tensile Strain[J].ISIJ International,2009(1):139-145. |
| [3] | Iwamoto S .Analysis of multiple cracking and interfacial debonding of the galvannealed coating layer under applied tensile strain[D].Kyoto University,2009. |
| [4] | Shojiro OCHIAI;Sohei IWAMOTO;Toyomitsu NAKAMURA;Hiroshi OKUDA .Crack Spacing Distribution in Coating Layer of Galvannealed Steel under Applied Tensile Strain[J].ISIJ International,2007(3):458-465. |
| [5] | Iwamoto S;Ochiai S;Okuda H.Finite element analysis of interfacial debonding of the Fe-Zn intermetallic coating layer on steel substrate[A].Osaka,The Iron and Steel Institute of Japan,2007:236-241. |
| [6] | Yoshinari NUNOMURA;Takayuki TAKASUGI .Plastic Deformation and Fracture Behavior of Galvannealed Coating[J].ISIJ International,2003(3):454-460. |
| [7] | Moon-Hi HONG .Correlation between the Microstructure of Galvannealed Coatings and the Defoliation during Press Forming[J].ISIJ International,2005(6):896-902. |
| [8] | Garza L G;Van Tyne C J .Fraction and formability of galvannealed interstitial free sheet steel[J].Journal of Materials Processing Technology,2007,187:164-168. |
| [9] | Kazuhiro Abotani;Kazuhiro Hirohata;Tetsuya Kiyasu .Hot-Dip Galvanized Sheet Steel with Excellent Press Formability and Surface Quality for the Automotive Panels[J].Kawasaki Steel Technical Report,2003(48):17-22. |
| [10] | Sakurai M;Imokawa T;Yamasaki Y.Effect of surface modification on coefficient of friction of galvannealed steel sheets[A].Brussels,Centre de Recherches Métallurgiques,2001:65-72. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%