研究了不同热轧工艺制度下碳钢/不锈钢复合板中碳钢界面组织的演变规律.结果表明,碳钢轧制后界面处压成微小粒子的奥氏体难以析出珠光体,轧制压力促使其发生相变形成铁素体区.单道次轧制结合界面有碳化物薄层析出,并随压下率增加而变厚,第二道次轧制碳原子在内应力作用下扩散碳化物层消失.铁素体内部析出碳化物使剪切强度增加,碳化物薄层使剪切强度降低.
参考文献
[1] | Hwang Y M;Tzou G Y .An analytical approach to asymmetrical cold-and hot-rolling of clad sheet using the slab method[J].Journal of Materials Processing Technology,1996,62(01):249-259. |
[2] | S.C. Pan;M.N. Huang;G.-Y. Tzou .Analysis of asymmetrical cold and hot bond rolling of unbounded clad sheet under constant shear friction[J].Journal of Materials Processing Technology,2006(1/3):114-120. |
[3] | K. Yilamu;R. Hino;H. Hamasaki;F. Yoshida .Air bending and springback of stainless steel clad aluminum sheet[J].Journal of Materials Processing Technology,2010(2):272-278. |
[4] | Hong S T;Kim W;You Y J et al.Effect of annealing on two different niobium-clad stainless steel PEMFC bipolar plate materials[J].Transactions of Nonferrous Metals Society of China,2009,19(01):56-60. |
[5] | Chanseo Jeong;Tetsuo Oya;Jun Yanagimoto .Analysis of fracture behavior and stress-strain distribution of martensite/austenite multilayered metallic sheet[J].Journal of Materials Processing Technology,2013(4):614-620. |
[6] | 井玉安,王晨宇.不锈钢复合板生产技术综述[J].鞍山科技大学学报,2007(06):590-594. |
[7] | 丁海民,范孝良,王进峰,李春燕,王小磊.热轧复合不锈钢-碳钢复合板界面特征[J].材料热处理学报,2011(11):18-22. |
[8] | 李喜,任忠鸣,王立龙,余建波,邓康,徐匡迪.强磁场对Bi-6%Mn合金中MnBi相形态和相变的影响[J].金属学报,2006(01):77-82. |
[9] | 楚志兵,马立峰,黄庆学,闫志杰,潘海彦,潘丽君.高强度不锈钢弧形板冷弯成形机理的集成研究[J].四川大学学报:工程科学版,2012(06):71-78. |
[10] | Kang, J.-H.;Rivera-Díaz-Del-Castillo, P.E.J..Carbide dissolution in bearing steels[J].Computational Materials Science,2013:364-372. |
[11] | Xiao X F;Ye S P;Yin W X et al.HCWCI/carbon steel eimettal Liner by liqued-liqued compound lost foam castion[J].Journal of Iron and Steel Research:International,2012,19(10):13-19. |
[12] | 雍岐龙.钢铁材料中的第二相[M].北京:冶金工业出版社,2006:267-270. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%