通过运用氧氮分析仪、大样电解分析、扫描电镜及能谱分析等分析手段,研究高强钢尾坯不同浇铸长度洁净度。结果表明：尾坯不同浇铸长度的w（T[O]）、w（[N]）和大型夹杂物数量是沿拉坯方向呈逐渐减小的;大型夹杂物主要为：SiO2夹杂物、含K的SiO2-Al2O3夹杂物、含Na的SiO2-Al2O3-CaO夹杂物,以及数量较少的TiN-SiO2夹杂物、MgO-CaO夹杂物和SiO2-CaO夹杂物;距尾端1.5m时,尾坯的洁净度达到正常水平,建议尾坯切割长度大于等于1.5m。
By means of oxygen and nitrogen analyzer, SLIME, SEM, EDS, etc. the cleanliness of high strength steel final slab was studied. The results were as follows: the w(T[O]), w([N]) and the quantity of large-inclusions were decreased obviously along the casting direction. The large-inclusion was mainly SiO2 , SiO2-Al2 O3 containing K and SiO2-Al2O3-CaO containing Na. And a small quantity of TiN-SiO2 , MgO-CaO and SiO2-CaO inclusions were found in the final slab. Where the distance was 1.5 m from the end of the final slab, the cleanliness was con- sistent with normal slab, so the cutt.ing length of final slab was 1.5 m at least.
参考文献
| [1] | 薛文辉.连铸浇次末期工艺的研究[C].2005中国钢铁年会论文集,2005:380-383. |
| [2] | 薛文辉,吴华章,宋满堂.非稳态浇铸对板坯质量影响的研究[J].炼钢,2009(06):56-58,73. |
| [3] | 蔡起良.非稳态浇注时铸坯裂纹的控制措施[J].连铸,2009(04):31-32. |
| [4] | 孙彦辉,蔡开科,赵长亮.非稳态浇注操作对连铸坯洁净度影响[J].钢铁,2008(01):22-25. |
| [5] | 袁方明,王新华,李宏,任子平,张富强,孟劲松,孙群.不同浇铸阶段IF钢连铸板坯洁净度[J].北京科技大学学报,2005(04):436-440. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%