欢迎登录材料期刊网

材料期刊网

高级检索

为研究润滑条件对热轧高强钢板的组织和性能的影响机理,对热轧坯料分别进行了润滑和不润滑两种轧制,并对两种轧制条件下的钢板进行了显微组织观察及力学性能测试.结果表明:润滑条件对铁素体区热轧高强IF钢的屈服强度(σs)、抗拉强度(σb)、总延伸率(η)和n值影响不大,但对r值和Δr值有显著的影响.在未润滑条件下轧制的钢板的r值(0.96)明显低于润滑条件下轧制的钢板的r值(1.27),|Δr|(0.465)值则明显高于润滑条件下的|Δr|值(0.075).使用润滑轧制可以获得具有优异深冲性能的高强IF钢板.

To figure out the influence mechanism of lubricant condition on microstructures and properties of warm rolled high strength IF steels and guide industrial production further,rollings with or without lubricants were performed,then microstructure observation and mechanical property test were carried out.The results show that:lubrication condition has little effect on yield strength(σ s),tensile strength(σ b),total elongation(η)and n value,but has prominent effect onΔr value and r value.Without lubrication,ferritic rolled steel sheet has lower r value(0.96)than that(1.27)of the steel rolled with good lubrication,and has higher |Δr|value(0.465)than that(0.075)of the steel rolled with good lubrication.Lubricant rolling is applicable to get good deep drawability.

参考文献

[1] 于凤云,王轶农,蒋奇武.深冲IF钢再结晶{111}纤维织构形成机制探讨[J].材料科学与工艺,2008(05):724-727.
[2] 王昭东,郭艳辉,王国栋.高强Ti-IF钢铁素体区热轧和冷轧过程织构演变规律[J].材料科学与工艺,2009(01):75-79.
[3] GUO Yan-hui,WANG Zhao-dong,ZOU Wen-wen,LIU Xiang-hua,WANG Guo-dong.Textures and Properties of Hot Rolled High Strength Ti-IF Steels[J].钢铁研究学报(英文版),2008(05):70-76.
[4] PASI JUNTUNEN;DIERK RAABE;PENTTI KARJALAINEN .Optimizing Continuous Annealing of Interstitial-Free Steels for Improving Deep Drawability[J].Metallurgical and materials transactions. A, physical metallurgy and materials science,2001(8):1989-1995.
[5] Tomitz A.;Kaspar R. .Deep-drawable Thin-gauge Hot Strip of Steel as a Substitution for Cold Strip[J].ISIJ International,2000(9):927-931.
[6] 王昭东,郭艳辉,赵忠,孙大庆.应用铁素体区热轧工艺开发超低碳热轧深冲板[J].东北大学学报(自然科学版),2005(08):747-750.
[7] H. Zhao;S. C. Rama;G. C. Barber .Experimental study of deep drawability of hot rolled IF steel[J].Journal of Materials Processing Technology,2002(1/3):73-79.
[8] 王昭东,刘相华,王国栋,何晓明,赵昆,张丕军,李自刚.Ti-IF钢铁素体区热变形行为研究和Zener-Hollomen参数方程的建立[J].材料科学与工艺,2000(04):6-10.
[9] 张红梅,刘英义,蒋奇武.变形温度对高强IF钢应力-应变曲线及组织的影响[J].热加工工艺,2006(01):76-78.
[10] 王作成,关小军,王先进.润滑条件对热轧IF钢的性能及组织的影响[J].钢铁,2000(11):44-46.
[11] S.Matsuoka .Effect of Lubrication Condition on Recrystalliztion Texture of Ultra-low C Sheet Steel Hot-rolled in Ferrite Region[J].ISIJ International,1998(6):633-639.
[12] 韩福涛 .冶金因素对热轧深冲无间隙原子(IF)钢板组织性能影响的研究[D].山东大学,2009.
[13] 胡恒法,裴新华.热轧薄板冲压性能研究[J].轧钢,2004(03):4-7.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%