欢迎登录材料期刊网

材料期刊网

高级检索

The mechanism for heat transfer of radiation is usually adopted to heat strip in vertical continuous annealing furnace. The rate of heat transfer among strip and other objects can be hugely affected by the parameters of strip speed, geometry factors and radiating characteristic of surfaces of strip, radiating tubes and walls of furnace. A model including all parameters is proposed for calculating the heat transfer coefficient, predicting the strip tempera- ture and boundary temperature of strip through analyzing these parameters. The boundary temperature is a important datum and different from average arithmetic value of temperature of strip and temperature in furnace. Also, the model can be used to analyze the relation for temperature of strip and heat transfer coefficient, total heat transfer quantity and heating time. The model is built by using the radiating heat transfer rate, the Newtonrs law of cooling, and lumped system analysis. The results of calculation are compared to the data from production line. The comparisons indicate that the model can well predict the heating process. The model is already applied for process control in pro- duction line. Also, this research will provide a new method for analyzing the radiation heat transfer.

参考文献

[1] Masayuki Imose .Heating and Cooling Technology in Continuous Annealing[J].Transaction ISIF International,1985,25:911.
[2] YANG Chang liu;QIU Gang;ZHANG Zun pu.Study and Im provement for Heating Model in Heating Furnace for 1 550 Continuous Galvanizing Line[J].Metallurgical Industry Automation,2004(Supplement):13.
[3] JIN Wu-ming.Study for Control Model on Strip Temperature at Heating Section in Continuous Annealing Furnace[J].Metallurgical Industry Automation,2005(Supplement):767.
[4] ZHU GUANC-jun;SUN Ya-qin.Transport Principal[M].北京:冶金工业出版社,2009
[5] ZHANG Jin-zhou.Advanced Heat Transfer[M].北京:科学出版社,2009
[6] WANG Hou-hua;ZHOU Gen-ming;JI Xin-yu.Fundamentals of Heat Transfer[M].重庆:重庆大学出版社,2006
[7] Incroper F P;Dewitt D P;Bergman T L.Fundamentals of Heat and Mass Transfer[M].北京:化学工业出版社,2009
[8] JIA Li;FANG Zhao-hong.Higher Heat Transfer[M].北京:高等教育出版社,2008
[9] Zhu B;Schock H S;Hogan T.A Numerical Study of Convective and Radiative Heat Transfer Between Parallel Plates Connected by an Array of Rods[A].Reno:Published by the Ameri can Institute of Aeronautics and Astronautics,2006:1.
[10] Essam E,Khalil.Heat Transfer Characteristics of Turbulent Flames in Furnaces and Combustion Chambers[A].Orlando:American Institute of Aeronautics and Astronautics,2009:1379.
[11] Yassine Cherif;Annabelle Joulin;Laurent Zalewski;Stephane Lassue .Superficial heat transfer by forced convection and radiation in a horizontal channel[J].International Journal of Thermal Sciences,2009(9):1696-1706.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%