随着地球资源的日益枯竭,世界环境的不断恶化,绿色制造已成为中国乃至世界经济发展的必然选择。玻璃制造业是能源密集型产业,在平板玻璃制造的全过程中,熔化和澄清阶段能耗占全部能耗的一半以上,因此,熔化和澄清是玻璃工业节能研究的关键领域。本文概述了玻璃熔制能耗的计算与测量方面的研究进展,总结了其成果,分析了其局限性,并就以后科研工作和实践探索的方向提出几点建议。
Along with the exhaustion of global resources day after day and environmental deterioration,green manufacturing has become an inevitable choice for China and the world.Glass industry is energy-intensive,in the whole process of flat-glass making,the energy consumption of melting and clarification are more than a half of the total.Therefore,melting and clarification are key fields of energy saving researches.This paper illustrates the advances in calculation and calorimetry of glass melting energy consumption,reviews the advances and analyzes its limitations,further more,presents recommendations for experimental research and practical exploration in future.
参考文献
| [1] | Bayram J;Kaya L;Orhan B .Developments in glass meltingfurnace design energy and environmental management[J].Current Advances in Materials and Processes,2008,39(40):405-412. |
| [2] | E.Worrell;C.Galitsky.Energy Efficiency Improvementand Cost Saving Opportunities for the Glass Industry[M].California:U.S.Environmental Protection Agency,2008:94-720. |
| [3] | M.A.马特维耶夫;T.M.马特维耶夫;B.H.弗伦克尔;李秀中,张后尘.玻璃化学与工艺学计算[M].北京:中国建筑工业出版社,1978:253-258. |
| [4] | Stanislav Kasa;Franti ek Novotn y .Energy saving in batchmelting[J].Glass International,2006,29(05):83-90. |
| [5] | 叶大伦;胡建华.实用无机物热力学数据手册[M].北京:冶金工业出版社,2002 |
| [6] | 上海化工学院;浙江大学;武汉建筑材料工业学院.硅酸盐工业热工过程及设备[M].北京:中国建筑工业出版社,1980:135-141. |
| [7] | 杨志强,杨宏,吴亚丽,茅力佐.玻璃熔制效率的关键及熔窑大幅节能的方向[J].玻璃,2007(01):14-20. |
| [8] | O J. Whittemore .Energy Use and Efficiencies in Firing Ceramics, Melting Glass[J].American Ceramic Society bulletin,1999(7):69-71. |
| [9] | 樊德琴.玻璃工业热工设备及热工测量[M].武汉:武汉工业大学出版社,1993:175-181. |
| [10] | John B.Wachtman Jr;O.J.Whittemore .Energy usage infiring ceramics and melting glass[J].Ceramic Engineering andScience Proceedings,1994,15(01):85-180. |
| [11] | 刘振海;徐国华;张洪林.热分析仪器[M].北京:化学工业出版社,2006:73-92. |
| [12] | 杨南如.无机非金属材料测试方法[M].武汉:武汉理工大学出版社,1990:187-203. |
| [13] | K.Heide;R.Franke;H.G.Sch et al.Investigation of theEnergy Expended in Heating Glass raw materials to the meltingtemperature[J].Journal of Thermal Analysis,1988,33:615-618. |
| [14] | 代春梅 .E玻-璃熔化过程中的物化反应和能量消耗[D].大连:大连理工大学,2008. |
| [15] | 张本涛 .热处理对E玻璃比热焓和析晶性能的影响[D].大连理工大学,2009. |
| [16] | 邓炜,程金树,邓臻禄,邓敏.普通玻璃配合料硅酸盐烧结过程与热量计算[J].武汉理工大学学报,2010(22):111-113,122. |
| [17] | 李长久,王晋珍,孟政,姜宏,黄幼榕,崔竹.浮法玻璃熔化过程热量消耗的DTA研究[J].武汉理工大学学报,2010(22):20-24. |
| [18] | Robert L.Danley .New Heat-flux DSC Measurement Technique[J].Thermochimica Acta,2002,395(1,2):201-208. |
| [19] | J. Blumm;E. Kaisersberger .Accurate measurement of transformation energetics and specific heat by DSC in the high-temperature region[J].Journal of thermal analysis and calorimetry,2001(1):385-391. |
| [20] | M.F.J.Pijpers;V.B.F.Mathot .Optimization of instrumentresponse and resolution of standard-and high-speed powercompensation DSC[J].Journal of Thermal Analysis andCalorimetry,2008,93(01):319-321. |
| [21] | Kj?lseth, C.;Wang, L.-Y.;Haugsrud, R.;Norby, T. .Determination of the enthalpy of hydration of oxygen vacancies in Y-doped BaZrO_3 and BaCeO_3 by TG-DSC[J].Solid state ionics,2010(39/40):1740-1745. |
| [22] | I. ByUna;L. Trevani;S. C. Mojumdar;P. Tremaine;V. G. Papangelakis .MEASUREMENT OF REACTION ENTHALPY DURING PRESSUREOXIDATION OF SULPHIDE MINERALS[J].Journal of thermal analysis and calorimetry,2009(1):117-124. |
| [23] | V.A.Drebushchak .Calibration coefficient of a heat-flow DSC[J].Journal of themal analysis and calorimetry,2004,76:941-947. |
| [24] | McHugh, J.;Fideu, P.;Herrmann, A.;Stark, W. .Determination and review of specific heat capacity measurements during isothermal cure of an epoxy using TM-DSC and standard DSC techniques[J].Polymer Testing,2010(6):759-765. |
| [25] | Androsch R.;Kreitmeier S.;Wunderlich B.;Moon I. .Determination of heat capacity with a sawtooth-type, power-compensated temperature-modulated DSC[J].Thermochimica Acta: An International Journal Concerned with the Broader Aspects of Thermochemistry and Its Applications to Chemical Problems,2000(0):267-278. |
| [26] | GJB 330A-2000.GJB 330A-2000.固体材料60~2773K比热容测试方法[S].北京:国防科学技术工业委员会,2000. |
| [27] | Yasutoshi Saito;Kazuya Saito;Tooru Atake .Base line drawingfor the determination of the enthalpy of transition in classicalDTA,power-compensated DSC and heat-flux DSC[J].Thermochimica Acta,1986,104:275-283. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%