欢迎登录材料期刊网

材料期刊网

高级检索

摘要:为改善Nao,Bi0.5Ti03材料的电性能,采用溶胶一凝胶法制备了Nao,Bi0.5TiO3粉体,通过液相Ce掺杂和气相Ce扩渗两种方法,对Na0,Bi0.5TiO3粉体进行了改性,采用扫描电子显微镜(SEM)、X射线衍射仪(XRD)、阻抗分析仪和电阻仪对改性前后Nao,Bi0.5TiO3粉体的组成、结构和电性能的变化进行了研究.结果表明:Ce元素的添加有助于Na0.5Bi0.5TiO3粉体电阻率的降低,而扩渗改性使电阻率的降低更为显著,经600℃扩渗的Na0.5Bi0.5TiO3粉体的电阻率由3.71×106Ω·m降至2.39×101Ω·m;稀土Ce掺杂使Nao.5Bi0.5TiO3的介电常数减小,而Ce扩渗使Nao,Bi。TiO,的介电常数显著增大;Ce掺杂使粒径更加均匀,而随着气相扩渗温度的提高,晶粒粒径逐渐变大;Ce掺杂没有改变Na0.5Bi0.5TiO3的主晶相结构,但Na0.5Bi0.5Ti03粉体经Ce扩渗后,出现了单质Bi及Bi2Ti2O7、Na2Ti9O19、Na2Ti6O13的特征峰。

For improving the electrical conductivity of Na0.5 Bi0.5 TiO3 (NBT) powders, the pure NBT powders were produced by sol-gel method and modified by Ce liquid doping and Ce gaseous penetration. The effect of modification on the constitution,structure and electrical properties of Ce-modified Na0.5 Bi0. 5 TiO3 powders was studied by scanning electron microscopy (SEM), X-ray diffraction (XRD), impedance analyzer and resistance meter. The results showed that the addition of Ce helped to reduce the resistivity of Na0.5 Bio. 5 TiO3 powders, and the penetration method broughtl the lower resistivity than the doping method. The resistivity of Ce-modified Na0.sBio.sTiO3 powders penetrated at 600 ℃ was the lowest,which was decreased to 2.39 × 101 Ω · m from 3.71 × 106 Ω · m. The doping method made the dielectric constant of Na0.5 Bi0.5 TiO3 powders decreased, but the penetration method had the reverse effect. The Ce-doped Na0.5 Bi0.5 TiO3 powders had homogeneous finest particle size, and the particle size of the Ce-penetrated Na0. 5 Bio. 5 TiO3 powders was progressed with the penetration temperature increasing. The doping method did not change the main crystalline phases. But the new phases of Bi, Bi2Ti2OT, Na2Ti9019 and Na2Ti6013 were detected in the Ce-penetrated Na0.5Bi0.5TiO3 powders.

参考文献

[1] 王海震,王秀峰,于成龙,江红涛,田清泉,石江涛.溶胶-凝胶法制备Na0.5Bi0.5TiO3基无铅压电陶瓷的研究进展[J].材料导报,2009(17):52-55.
[2] Wu YG.;Zhang HL.;Zhang Y.;Ma JY.;Xie DH. .Lead-free piezoelectric ceramics with composition of (0.97-x)Na1/2Bi1/2TiO3-0.03NaNbO(3)-x BaTiO3[J].Journal of Materials Science,2003(5):987-994.
[3] Aree Herabut;Ahmad Safari .Processing and electromechanical properties of (Bi_0.5Na_0.5)_(1-1.5x)La_xTiO_3 ceramics[J].Journal of the American Ceramic Society,1997(11):2954-2958.
[4] 赁敦敏,肖定全,朱建国,余萍,庄严.[(Bi1-x-yLax)Na1-y]0.5BayTiO3压电陶瓷的性能与微结构[J].电子元件与材料,2004(11):1-3.
[5] 郝素娥,黄金祥,张巨生,王进福,刘志刚.Pr,Mn多元渗对BaTiO3陶瓷结构与电性能的影响[J].无机材料学报,2007(05):816-820.
[6] 郝素娥,王威力,王春艳,付东升,李佳龙.稀土改性BaTiO3粉体的制备及其导电性分析[J].无机化学学报,2009(06):1062-1066.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%