欢迎登录材料期刊网

材料期刊网

高级检索

通过后天抑制剂获得法制备了取向硅钢,对渗氮前后和高温退火升温阶段析出物的析出和转化规律进行了研究。研究结果表明,渗氮前脱碳退火态基体中存在少量的粗大AlN颗粒和细小AlN颗粒,渗氮处理后新析出大量的Si3N4析出物,高温退火升温阶段Si3N4将转化为(Al,Si)N,随着温度的继续升高(Al,Si)N颗粒将发生粗化,(Al,Si)N是后天抑制剂获得法制备取向硅钢的主要抑制剂。

Grain-oriented silicon steels were produced by acquired inhibitor method.The rule of precipitate transformation was studied after nitriding treatment and high-temperature finishing annealing.The results show that a small amount of large AlN and fine AlN are found in matrix before nitriding treatment,and a large amount of Si3N4 is precipitated in matrix after nitriding treatment.During the temperature rising period of high-temperature finishing annealing,Si3N4 would transform into(Al,Si)N,and(Al,Si)N,which would coarsen with the temperature increasing.(Al,Si)N was a main inhibitor of grain-oriented silicon steels producted by acquired inhibitor method.

参考文献

[1] Takahashi N;Harase J.Recent Development of Technology of Grain Oriented Silicon Steel[J].Materials Science Forum,1996(204/ 206):143.
[2] 曹树卫,申勇,孙江美.浅析电工钢的生产现状及技术发展[J].轧钢,2008(05):35-38.
[3] Kobayashi H;Kuroki K;Minakuchi M et al.Process for Preparation of Grain-Oriented Electrieal Steel Sheet Comprising a Nitriding Treatment[P].US,4979996,1990.
[4] T. KUMANO;T. HARATANI;N. FUJII .Effect of nitriding on grain oriented silicon steel bearing aluminum[J].ISIJ International,2005(1):95-100.
[5] 李军,孙颖,赵宇,喻晓军,李波.取向硅钢低温铸坯加热技术的研发进展[J].钢铁,2007(10):72-75.
[6] LIAO Chun-chi;HOU Chun-kan .Effect of Nitriding Time on Secondary Reerystallization Behaviors and Magnetic Properties of Grain-Oriented Electrical Steel[J].Journal of Magnetism and Magnetic Materials,2010,322:434.
[7] 王若平,刘静,毛炯辉,黎世德,许光,朱业超,石文敏.渗氮方式及氨气对取向硅钢氮含量的影响[J].金属热处理,2009(10):69-71.
[8] Wriedt H A .Solibility Product of Aluminum Nitride in:3 Percent Silicon Iron[J].Metallurgical and Materials Transactions,1980,11A(10):1731.
[9] Sakai T;Shiozaki M;Takashina K .A Study on AlN in High Permeability Grain-Oriented Silicon Steel[J].Journal of Applied Physics,1979,50(03):2369.
[10] 王若平,黎世德,方泽民,毛炯辉,李平和,许光.低温热轧高磁感取向硅钢板常化组织及析出相研究[J].金属热处理,2009(06):9-14.
[11] Ushigami Y;Kurosawa F;Komatsu H .Process for Preparation of Oriented Electrical Steel Sheet Having High Flux Density[P].US,5888314,1999.
[12] 何忠治.电工钢[M].北京:冶金工业出版社,1996
[13] Gladman T.On the Theory of the Effect of Precipitate Particles on Grain Growth in Metals[J].Proceedings of the Royal Society of London Series A:Mathematical,Physical and Engineering Sciences,1966(294):298.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%