研究了电脉冲处理对FeMnSiCrNiNbC合金形状记忆效应的影响,并对其微观机理进行初步探讨.结果表明,Fe17Mn5Si8Cr5Ni0.5NbC合金经5%预变形,300 V,1 Hz电脉冲处理13次后形状回复率达到80%,比800℃时效1000s获得的最大值提高12%.SEM分析表明,电脉冲处理可在极短的时间内加速诱导大量、细小的NbC颗粒在基体内析出,进而有效地改善了合金的记忆性能并提高了效率.
参考文献
| [1] | Sato A;Soma K;Mori T .[J].Acta Metallurgy,1982,30:1901. |
| [2] | Yang J H;Chen H;Wayman C M .[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1992,A23:1439. |
| [3] | Andrade M S;Osthues R M;Arruda G J.[J].Materials Science and Engineering,1999(A273-275):512. |
| [4] | Kajiwara S.[J].Materials Science and Engineering,1999(A273-275):67. |
| [5] | Otsuka H;Yamada H;Maruyama T et al.[J].ISIJ International,1990,30:674. |
| [6] | Kajiwara S.[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1999(273-275):67. |
| [7] | Tsuzaki T;Natsume Y;Tomota Y et al.[J].Scripta Metallurgica et Materialia,1995,33:1087. |
| [8] | Maki T;Tsuzaki K.[A].California:Monterey Irnst for Adv Studies,1993 |
| [9] | Dunne D P;Li H .[J].Trans Mar Res Soc Jpn,1994,18B:955. |
| [10] | Dong Z Z;Kajiwara S;Kikuchi T et al.[J].ACTA MATERIALIA,2005,53:4009. |
| [11] | 王彬华;文玉华;张伟 et al.[J].金属间化合物,2007,437:208. |
| [12] | 董治中,刘文西,陈金铭,孙国光.NbC对FeMnSiCrNi合金组织与记忆性能的影响[J].稀有金属材料与工程,2003(11):927-929. |
| [13] | Zhang W;Sui M L;Zhou Y Z et al.[J].Micron,2003,34:189. |
| [14] | 杨丽红,黄金亮,殷镖.电脉冲在现代材料制备与研究中的应用[J].热加工工艺,2003(02):51-53. |
| [15] | Wen Yuhua;Yan Mi;Li Ning .[J].Scripta Materialia,2004,50:835. |
| [16] | Hans Conrad .Effects of electric current on solid state phase transformations in metals[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(2):227-237. |
| [17] | 潘金生.材料科学基础[M].北京:清华大学出版社,1998:590. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%