欢迎登录材料期刊网

材料期刊网

高级检索

通过SEM,TEM,EBSD和示波冲击实验研究了450℃回火对X100管线钢显微组织和冲击断裂过程的影响.结果表明:X100管线钢的组织为板条贝氏体(LB)、针状铁素体(AF)和粒状贝氏体(GB)和平行排列的细小片状马氏体/奥氏体(M/A)组元,原始奥氏体晶粒被晶内和晶界处的亚结构分割细化.回火后,平行排列的M/A组元消失,LB结构弱化,大角度晶界比例下降.实验温度降低,X100管线钢的冲击功(E)、裂纹形成能(E1)和韧性扩展能(E2)变化较小;回火后,E、E1、E2、脆性断裂扩展能(E3)降低,脆性断裂趋势增大,脆性断裂止裂性能变差.

参考文献

[1] 杨政,郭万林,霍春勇.X70管线钢不同温度下断裂韧性实验研究[J].金属学报,2003(09):908-913.
[2] 邓伟,高秀华,秦小梅,赵德文,杜林秀,王国栋.X80管线钢的冲击断裂行为[J].金属学报,2010(05):533-540.
[3] 周民,杜林秀,刘相华,王悦新.不同温度下X100管线钢的冲击韧性[J].塑性工程学报,2010(05):108-113.
[4] 周平,黄少文,杜林秀,刘相华.X100管线钢冲击断裂过程及止裂性分析[J].东北大学学报:自然科学版,2012(11):1574-1577.
[5] 刘东雨,徐鸿,杨昆,白秉哲,方鸿生.贝体/马氏体复相组织对低碳合金钢强韧性的影响[J].金属学报,2004(08):882-886.
[6] Yong Zhong;Furen Xiao;Jingwu Zhang .In situ TEM study of the effect of M/A films at gram boundaries on crack propagation in an ultra-fine acicular ferrite pipeline steel[J].Acta materialia,2006(2):435-443.
[7] A. LAMBERT-PERLADE;A. F. GOURGUES;J. BESSON .Mechanisms and Modeling of Cleavage Fracture in Simulated Heat-Affected Zone Microstructures of a High-Strength Low Alloy Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2004(3a):1039-1053.
[8] 缪成亮,尚成嘉,王学敏,张龙飞,Mani Subramanian.高Nb X80管线钢焊接热影响区显微组织与韧性[J].金属学报,2010(05):541-546.
[9] 刘东升,程丙贵,罗咪.F460高强韧厚船板焊接热影响区的组织和冲击断裂行为[J].金属学报,2011(10):1233-1240.
[10] Abe F .Evolution of microstructure and acceleration of creep rate in tempered martensitic 9 Cr-W steels[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1997,234-236:1045-1048.
[11] Hong SG.;Park CG.;Lee WB. .The effects of tungsten addition on the microstructural stability of 9Cr-Mo Steels[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2001(2/3):202-207.
[12] Sakasegawa H;Hirose T;Kohyama A et al.Microstructural stability of reduced activatuin ferritic/martensitic steels unders high temperature and stress cycling[J].Fusion Engineering and Design,2002,61-62:671-675.
[13] 王克鲁,鲁世强,陈庆军,姜广林.回火温度对热轧低碳贝氏体钢显微组织和力学性能的影响[J].机械工程材料,2009(05):9-11.
[14] 余伟,谢利,武会宾,蔡庆伍.感应加热回火对X120管线钢组织和力学性能的影响[J].材料热处理学报,2012(02):56-61.
[15] 唐兴昌,康永林,薄艳艳.回火工艺对X120管线钢组织与性能的影响[J].材料热处理学报,2012(03):82-87.
[16] Wiesner C S .Predicting structural crack arrest behaviour using small-scale material characterisation tests[J].International Journal of Pressure Vessels and Piping,1996,69(02):185-196.
[17] Sayyed H. Hashemi .Apportion of Charpy energy in API 5L grade X70 pipeline steel[J].International Journal of Pressure Vessels and Piping,2008(12):879-884.
[18] 刘东升,程丙贵,陈圆圆.低C含Cu NV-F690特厚钢板的精细组织和强韧性[J].金属学报,2012(03):334-342.
[19] 周砚磊,徐洋,陈俊,刘振宇.FH550级海洋平台用钢冲击断裂行为实验研究[J].金属学报,2011(11):1382-1387.
[20] X. Z. ZHANG;J. F. KNOTT .CLEAVAGE FRACTURE IN BAINITIC AND MARTENSITIC MICROSTRUCTURES[J].Acta materialia,1999(12):3483-3495.
[21] 武会宾,尚成嘉,杨善武,侯华兴,马玉璞,于功利.超细化低碳贝氏体钢的回火组织及力学性能[J].金属学报,2004(11):1143-1150.
[22] 高古辉,张寒,白秉哲.回火温度对Mn系低碳贝氏体钢的低温韧性的影响[J].金属学报,2011(05):513-519.
[23] 邓伟,高秀华,秦小梅,高鑫,赵德文,杜林秀.冷却速率对变形与未变形X80管线钢组织的影响[J].金属学报,2010(08):959-966.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%