利用X射线衍射仪分析了在高能球磨制备纳米Al2O3/Al混合粉体过程中,球磨时间和纳米Al2O3含量对铝相晶粒尺寸和晶格应变的影响.结果表明:在初期短时间的球磨中,微米铝粉的晶粒尺寸迅速细化到纳米级,但随着球磨时间的进一步延长,高能球磨为晶粒融合和再生长提供了能量,使铝晶粒沿着某些晶向有长大的趋势;当Al2O3体积分数较低(5%)时可促进铝粉的破碎,但高含量的Al2O3则对铝粉的球磨破碎不利.
The effects of milling time and nano-Al2O3 content on the grain size and lattice strain of aluminium phase during the high-energy ball milling of nano-Al2O3/Al mixed powders were analyzed by using X-ray diffraction. The results show that in the initial stage of ball milling, the grain size of Al powders was refined from micron-size to nanno-size.With the time extending further, high-energy ball milling provided energy to grain growth and recombining, the aluminum grainsgrew along the special crystal Lower Al2O3 content (5vol%) could promote the aluminum powders crushing, but high Al2O3 content would be disadvantageous to the crushing of the powder ball milling.
参考文献
| [1] | D. C. Jia .Influence of SiC particulate size on the microstructural evolution and mechanical properties of Al-6Ti-6Nb matrix composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):83-90. |
| [2] | M. Adamiak;J.B. Fogagnolo;E.M. Ruiz-Navas .Mechanically milled AA6061/(Ti_3Al)_p MMC reinforced with intermetallics - the structure and properties[J].Journal of Materials Processing Technology,2004(0):2002-2006. |
| [3] | H. Ferkel;B. L. Mordike .Magnesium strengthened by SiC nanoparticles[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(1/2):193-199. |
| [4] | F. Tang;M. Hagiwara;J. M. Schoenung .Microstructure and tensile properties of bulk nanostructured Al-5083/SiC_p composites prepared by cryomilling[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):306-314. |
| [5] | Karimadeh, F;Enayati, MH;Tavoosi, M .Synthesis and characterization of Zn/Al2O3 nanocomposite by mechanical alloying[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1/2):45-48. |
| [6] | 贺春林,刘常升,孙旭东,才庆魁.纳米SiC颗粒增强铝基复合材料的拉伸性能[J].东北大学学报（自然科学版）,2005(06):554-557. |
| [7] | C. Suryanarayana .Mechanical alloying and milling[J].Progress in materials science,2001(1/2):1-184. |
| [8] | Liu, SF;Zhang, LG;An, LN .Phase transformation of mechanically milled nano-sized gamma-alumina[J].Journal of the American Ceramic Society,2005(9):2559-2563. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%