欢迎登录材料期刊网

材料期刊网

高级检索

采用纳米TiO_2对丝网印刷釉料进行改性,制得一种能在低温下快速烧成的改性釉料.用扫描电镜、X射线衍射仪、红外光谱分析仪等仪器对釉料、釉面进行了结构与形貌分析.结果表明:在750~800 ℃温度烧成时,当加入5~7.5wt%纳米TiO_2能与原釉料良好地结合,制得平整、致密、光滑有光泽的乳白色釉面.

In this paper,a modificative glaze was prepared using nano-TiO_2 as the additive which resulted in sintering quickly at low temperature. The structure and configuration of the glaze were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), infrared spectrum (IR). The results show that nano-TiO_2 could combined well with silk screen printing glaze and a looked flat, compact, lubricity and reflect ivory-white glaze is obtained by using 5-7.5wt% of nano-TiO_2 and calcining at 750-800 ℃.

参考文献

[1] 马养志,杨玉峰,成智文.我国卫生陶瓷釉面最新技术及发展现状[J].陶瓷,2002(04):12-15.
[2] 李萍 .陶瓷面砖釉与施釉技术的发展[J].陶瓷研究,1997,12(01):33-36.
[3] 俞康泰.现代陶瓷色釉料与装饰技术手册[M].武汉:武汉工业大学出版社,1999:1-262.
[4] 杜海清.陶瓷釉彩[M].长沙:湖南科学技术出版社,1985:1-425.
[5] Sunda K;Kikuchi Y;Hashimoto K et al.Bactericial and detoxification effects of TiO_2 thin photocatalysts[J].Environmental Science and Technology,1998,32(05):325-329.
[6] 周武艺,曹庆云,唐绍裘.提高纳米二氧化钛可见光光催化活性研究的进展[J].硅酸盐学报,2006(07):861-867.
[7] Zhou W Y;Cao Q Y;Liu Y J et al.The enhancement of TiO_2 photocatalytic activity by Gd~(3+) doping[J].Advances in Applied Ceramics:Structural Functional and Bioceramics,2007,106(05):222-225.
[8] 张剑平,施利毅,胡莹玉,陆永生,潘庆谊.纳米二氧化钛光催化剂形态和活性的研究[J].上海大学学报(自然科学版),1999(04):303-306.
[9] 张世英,周武艺,周艺,陈振华,万隆,肖凡平.纳米二氧化钛纤维的制备及其光催化活性[J].硅酸盐学报,2006(01):55-59.
[10] Zhou W Y;Tang S Q;Wan L et al.Preparation of nano-TiO_2 photo-catalyst by hydrolyzation-precipitation method with metatitanic acid as the precursor[J].Journal of Materials Science,2004,39(03):1139-1141.
[11] 孙永泰.釉面砖针孔缺陷分析[J].陶瓷,2005(03):42-43.
[12] 余端略,刘建华,刘文茂.几种釉面缺陷的影响因素分析[J].中国陶瓷工业,2008(05):33-34,32.
[13] 王春玲;罗宏杰 .高温钛乳浊釉显微结构的研究[J].硅酸盐通报,1997,16(04):10-13.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%