本文以时间推进通流设计方法为工具,设计了两个压比3.0级别的风扇转子,探讨了环量轴向分布形式对设计的影响.两个设计采用不同的环量分布,一为环量沿轴向线性变化,另一为环量沿轴向按余弦曲线变化,三维粘性计算结果表明,在峰值效率点,后者压比、效率和流量都高于前者.后者叶尖形成预压缩效果更为显著的叶型,对激波有更好的控制,激波后分离区小,更适合用于高负荷风扇的设计.
参考文献
| [1] | Spurr,A .The Prediction of 3D Transonic Flow in Turbomachinery Using a Combined Through-flow and Blade-to-Blade Time Marching Method[J].International Journal of Heat and Fluid Flow,1980,2(04):189-199. |
| [2] | Dawes W N .Toward Improved Throughflow Capability:The Use of Three-Dimensional Viscous Flow Solver in a Multistage Environment[J].ASME Journal of Turbomachinery,1992,114:8-17. |
| [3] | 季路成,孟庆国,周盛.叶轮机通流计算的时间推进方法[J].航空动力学报,1999(01):23-26. |
| [4] | Jameson A;Schmidt W;Turkel E .Numerical Solutions of the Euler Equations by Finite Volume Methods Using Runge-Kutta Time Stepping Schemes[AIAA paper 81-1259][R].,1981. |
| [5] | Damle S V .Throughflow Method for Turbomachines Using Euler Solvers[AIAA-96-0010][R].,1996. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%